OZ Futura lips nad barrels sizes.

[Zic]

I would say that they are 1´" drop lips, 0.5" centers and 6" barrels then.
Good luck with the set man, i personally love futuras.

[lowrider]

@Zic, just checked wheels, they're sandwich mounted.

[Zic]

I know the 8.5's pretty well, what et are they?

[projektzwo]

i'll use this thread as i'm in the almost same situation...

i have 8,5 AMG Aero I wheels, made by OZ, they're rear mounted (not sandwich), so can you tell me by these pictures are those lips 1,5 inch wide or not...

http://store.picbg.net/pubpic/F4/79/86cb2dcf1db8f479.jpg

http://store.picbg.net/pubpic/8D/B6/ee91dd645c778db6.jpg

http://store.picbg.net/pubpic/60/E8/5732b8a317a360e8.jpg

[Zic]

Like said, looks to be a 1" drop lip, and 7" barrel IF they are sandwich mounted. But I've personally never seen a set of OZ wheels sandwich mounted, if you remove the sealant it would be easier to identify it, and say what the size of the barrel is.

[1badg35]

Looks to me like a 1" drop lip and the center is probably .5" thick (like most) and if it is sandwich mounted the drop lip covers most of the center based on its design.

with that said, it looks to me like a 6.5" barrel (about 1" of the barrel has the sealant slopped on it, 1" drop lip and .5" thick center. If rear mounted, its questionably a 7" wheel not 7.5

if you add a picture of the back of the wheel, it will be much more apparent how the wheel is assembled. Every OZ wheel i have seen is rear mount

[lowrider]

made a quick research and these lips look like 1", still don't know what's the width of the center...

[lowrider]

I need some help guys, these are 7.5Jx17", et50, 5x114.3. I cannot figure out what are the lips/barrels sizes. How should I measure them, and what is the width of the centers?
I easily measure the BBS wheels this way: lip x" +center 0.5" + barrel y" = total J, is this valid for the OZs?
Thanks in advance.