Stay with et15 or get et0

[Dylan_M]

Hey guys I am looking to order a new pair of wheels for this summer. My current setup is 15x8 et15 with 15mm spacers all around. There the xxr 531s stretched on kumho 175/55.

Heres a photo on the fitment I had this summer.





There are a couple pics of the fitment not the best fitment pics but they work. My big question for you guys is i wanna get a more aggressive fitment and make it stand out more. The wheels are made custom so i can choose my offset. Should i go with 15x9 with a 0 offset or stick with 15x9 offset 15 or somewhere in between? And the wheels i am buying out of Seattle from Euroaddikts.

http://seattle.craigslist.org/see/ptd/3501072408.html

Just let me know what you guys think, and input and advice with help a lot. Thanks guys!!

[Ollie]

15x9 +0 will poke half an inch more than your current set up. lol simple math, it's hard.

[KarlSpackler]

1. Can you adjust for more camber?
2. Can you lower the car more?

If the answer to either of those is no, leave it as is or it will look silly. You have plenty of poke as is, you need more low in my opinion

[Dylan_M]

The most camber i can get is -3 in rear and front. And yes i could lower it more all around. I just want a deep dish wheel and to get rid of the xxr's and take off my spacers.