assembling oz futuras

[P78]

noob question

i got some futura's too

how do you torque them?

[cyclegrip]

Start at opposite bolts and work around the wheel

Sent from my go go gadget phone

[06blcksi]

hey guys one last question were can i find bolts to hold the center caps in place perferably original bolts

[06blcksi]

is it better to let them cure in the heat or iin room tempature idk weather to leave it inside or in the garage

[Beware]

Room temp I'd think.....here's where I let mine cure

[projektzwo]

one more noobish question... when you assembled the wheels and torque the bolts in star pattern, is there any specific order for the bolts?

[stinkinrich]

When I built my futuras, I got 4 bolts, ones at 12, 3, 6 and 9 oclock postions and nipped them up so the barrel met the face all square. Then just went around the rest one by one but working on each one thats opposite to one another.

[Francois Dillinger]

pm skrapez for any questions you have on assembling futuras.

[Beware]

When I built my futuras, I got 4 bolts, ones at 12, 3, 6 and 9 oclock postions and nipped them up so the barrel met the face all square. Then just went around the rest one by one but working on each one thats opposite to one another.

Pretty much that.....I use sticky dots and put one on each bolt head and then take it off once I've done that bolt, that way you don't lose track which you have and haven't done as it can get pretty confusing doing 30/34/35(BBS or OZ depending) bolts per wheel.

[Byron]

pm skrapez for any questions you have on assembling futuras.

+1, that guy knows his stuff