US supplier for OZ lips / barrels? Need 18x6.75 stepped barrels

[ClayMan]

Unfortunately Rotiform only makes them in 0.5" increments, so they can't do 6.75". Are there any other alternatives without going across the ocean?

[Zic]

Why would you need a 6.75 barrel? For clearance and maximum width?
As far as i know they are all made in .5 increments.
Also, you can go to someone and make them cut the barrel to size and re-weld it.
Weldcraft does it.


Link tho the thread were i got this info.
http://www.stanceworks.com/forums/sh...t=22326&page=8
hope this helps. Good luck with your project.

[Jesus Christ]

x2 for weldcraft.

a few of my friends have used them with excellent results if you REALLY NEED that .25 of an inch.

[ClayMan]

The Hamann (OZ) wheels I have use all 0.25" parts.

Front is 3.25" outer with 5.75" inner.
Rear is 3.25" outer with 6.75" inner.

I want another pair of 6.75" barrels to rebuild the fronts into a square setup.

[derrick2237]

http://www.tunershop.com/Wheel_accessories/Inner_Barrels/OZ/OZ_Inner_Barrel_18_inch_x1500_1560_1562x_p220956.html