Announcement

Collapse
No announcement yet.

ACS Type 1 differences?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ACS Type 1 differences?

    Hey everyone, I recently purchased a set of 18x10, 18x8.5 RH wheels.

    They look extremely similar (As far as I can tell) to ACS Type 1.

    I've heard of ACS Type 1's being OZ wheels as well.

    My question is, what is the difference between all these different brands/models?

    I see some listed plainly as ACS Type 1, then there are OZ racing ACS Type 1, and occasionally see a "Rennsport" ACS Type 1.

    Some sellers state the wheel is made by RH as an ACS wheel?

    Can anyone fill me in on the differences? Are there differences?

    Thanks a lot!



    Here are the wheels I own(Previous Owner's Pic):


  • #2
    ACS type 1 Rennsport are all the same thing. they are made by OZ. although i believe the RH wheels are modular as well, are basically a very close replica of the ACS.
    Originally posted by Kielan
    I've had a lot more fun in my Dad's Prius than I care to admit.




    BMW e23 build Thread

    Comment


    • #3
      Originally posted by NegativeCamber View Post
      ACS type 1 Rennsport are all the same thing. they are made by OZ. although i believe the RH wheels are modular as well, are basically a very close replica of the ACS.
      This. and i can spot the difference a mile away. The spokes are way different. I THINK that the RH are 3piece. While the OZ are 3piece. "Racing / Rennsport" indicated that they are 3piece. (Tho the 18inch type1's racing made by OZ are 2piece) You can get them as mono blocks as well.

      Also that the RH is a copy of the 17inch version of ACS Type1 "racing / Rennsport"
      the 18inch version is different. Its front mounted apposed to the 17inch version that is rear mounted.



      examples. ACS type1 mono block.



      ACS type1 racing 17inch



      AS type1 racing 18inch
      Do not confuse these with the type2's. The main difference between the front mounted type1's and type2's. is that in the type1's front mounted the bolts go all the way around. While the type2's the bolts stop at the spokes.


      Oh well, hope i did not confuse anyone. but that's how it goes.
      ACS Type 1 racing. 17" = 3piece, rear mounted, made by oz.
      ACS Type 1 racing. 18" = 2piece, front mounted, made by oz.

      ACS Type 2 racing. 17" = 3piece, front mounted, made by ronal.
      ACS Type 2 racing. 18" = 3piece, front mounted, made by ronal.
      -Instagram@jdjurhuus
      Stretchsaurus and Pokemon.

      Comment


      • #4
        You sir have RH XD's.

        See Sig
        http://www.r3vlimited.com/board/imag...es/cruisin.gif

        Comment

        Working...
        X