will 18x10" fit on audi a6?

[justlikechuck]

Hi!

Lookin' at the XXR 521 wheels for my audi a6 avant -99 and was wondering if they would fit? Does I have to pull the fenders alot?

The wheels is 18x10" square setup, with ET 30 & the tires is 4x 215/35 Nankang NS-2!

The car is also lowered on Coilovers!


Will be ordering soon if the would fit so fast answers would be appreciated!

Regards

[Vstone2262]

What are the offsets?

And no, I do not think they will fit at all. My a6 with the factory 16x7 (I think) Do not have too much room to do anything. Granted if you were lower it might make a little more clearance.

There is an silver avant on bently wheels, I would talk to him about what modifications and final offsets/widths he used.

[bthasht]

Xxr's don't fit Audis because they are cheap rep wheels. Don't even bother

Sent from my LG-E739 using Tapatalk 2

[sacrifice]

Xxr's don't fit Audis because they are cheap rep wheels. Don't even bother

Sent from my LG-E739 using Tapatalk 2

Don't be an asshole.. He is free to do what he wants.

In regards to fitment I have no idea to be honest. I would plug in your numbers here:

http://www.willtheyfit.com/

That should help you a bit.

[NeedingAnAudi]

They will fit. The B5 guys have been messing with 10s a lot lately.

[justlikechuck]

Thx guys! but I've just ordered some 18"x9.5" rota's instead!

[bthasht]

Rotas on a a6 avant.:thumbdown:

Your car so good luck to ya

Sent from the tip of my fingers using tapatalk

[justlikechuck]

So I've been wondering if anyone knows what's the best offset for the "hellaflush" mode?!

The wheels is 18"x9.5" ET30 square setup, do I need more spacers or is it enough?

[hinrichs]

get them...put tires on...then go from there...best way to figure out whats needs to be flush

[BreadBaskett]

get them...put tires on...then go from there...best way to figure out whats needs to be flush

Best advice I've heard about figuring out if wheels work or not. The only way to know for sure is to try it. If they don't then turn around and sell. At least buying the next wheels you'll know what you have to work with...

[bradp@adaptecspeedware]

18x9.5 et30 should poke a little bit without a spacer. now please dont use the term hellaflush anymore lol

[gary121]

How did you get on mate?