OZ Wheel Bolt Tool

[phish sticks]

Hey posting this for a friend from another forum, figured someone on here might have an idea where to get it.

Does anyone have or know where I can buy/borrow a 10 point bit for OZ wheels? I've been searching all over and all I've found is the 3 piece OZ bit/socket set from Tuner Shop which is $160 + another $60 for shipping. [down] Any help would be greatly appreciated. I want to refinish my wheels asap.

Shoot me a PM if you can help [up]

[staystetti]

Hell no. You should be able to get an xMM 10 point bit at an auto store/home depot. Just find out how big it is.

[MrZog]

Hell no. You should be able to get an xMM 10 point bit at an auto store/home depot. Just find out how big it is.

sometimes, if you don't have a clue . . just don't answer . .

OZ uses "special" non standard OZ bolts in a special and annoying size . . so really just the original tools work . . no metric/standard tool fit . . and do not just try it anyway . . because you're gonna ruin em . .

[Jorge]

I duno about that, I split mine down with a Laser 8mm and 10mm socket... 10pt obviously.

[Anonymoose]

^That

http://www.ebay.co.uk/itm/SPLIT-RIM-ALLOY-WHEEL-SOCKET-IMPACT-QUALITY-10-POINT-10MM-5133-/350514827744?pt=UK_Hand_Tools_Equipment&hash=item519c4fd1e0

http://www.ebay.co.uk/itm/SPLIT-RIM-ALLOY-WHEEL-SOCKET-IMPACT-QUALITY-10-POINT-10MM-5133-/350514827744?pt=UK_Hand_Tools_Equipment&hash=item519c4fd1e0

[Jorge]

Same link twice, you mean this one?

http://www.ebay.co.uk/itm/SPLIT-RIM-ALLOY-WHEEL-SOCKET-IMPACT-QUALITY-10-POINT-8MM-5132-/350514832148?pt=UK_Hand_Tools_Equipment&hash=item519c4fe314#ht_1079wt_952

[Stephen]

Double check sizes but I have some. Coult rent them out to you

[chrislane31]

All of links are for the female sockets. This guy needs the male bit for Supraleggara IIIs.

[1badg35]

^how was this not obvious to the posters before you. haha. matt even put up a picture of his bolts that he needs to remove. he needs a male 10pt allen head. ive been looking with him, and so far, no options. I almost want to start producing them, since there is no seller for these

[chrislane31]

I am waiting to hear back about them. Making some would be hard because the market is so much smaller the the 10 point sockets.

[hazMatt]

double check sizes but i have some. Coult rent them out to you

ygpm

Thanks for posting this thread Ian.

[Bystrov]

dunno if relevant still, BUT solution is this (as i have had to do this on mine) what you need is called a Serrated wrench, you can pick one up for 5.29 from a local NAPA store. its the only store i know that still carries old school tools.... adapt it to a socket and go crazy.. Style 42 BMW wheels are exactly the same.