Rebuilding SSR Professors

[Counteract]

Is there much difference between SSRs and Meister SP1s?

My SP1s are two piece with the barrels welded together as posted above.

[staystetti]

You probably can, but you'd either need to cut the weld or just buy new barrels as well.

[Schultz28]

thats dumb. so you cant just get bigger lips for these wheels?!

[Strawhat]

That is contradictory........... the center cap doesnt count as a 3rd piece.

If you cant split the rim halves and face, they arent 3 piece

Good point.
They are 3-piece construction, but welded together.
Just like Work Euroline's are welded 2-piece, in a sense.

I think he means that they're 3 piece construction, but not..deconstruct-able 3 piece.

Yes, thank you.

[staystetti]

I think he means that they're 3 piece construction, but not..deconstruct-able 3 piece.

[KarlSpackler]

SSR Wheels are 3-piece wheels,
BUT they are also welded, I used to own a set, as it says in the add above this post.

That is contradictory........... the center cap doesnt count as a 3rd piece.

If you cant split the rim halves and face, they arent 3 piece

[Strawhat]

SSR Wheels are 3-piece wheels,
BUT they are also welded, I used to own a set, as it says in the add above this post.

[Ed6_Civ]

there is no way sp1's are welded.

http://www.ssr-wheels.com/wheels/sp1_17181920.asp

just hover your mouse on the 3pc logo above the wheel image.



same goes for any of they're 3pc designed wheels. depending if the face is top mounted, the face may be removable.

[Schultz28]

professor sp1's are true 3 piece wheels, but the barrel and lip are welded from factory as a
safety concern and then sealed with silicone on top on the weld. http://www.ssr-wheels.com/technology/

my vienna dish's are the same way.

under 3pc wheel it doesnt say anything about them being welded... only both the 2pc and 2pc hybrids mention anything about welding.

there is no way sp1's are welded.

[Ed6_Civ]

professor sp1's are true 3 piece wheels, but the barrel and lip are welded from factory as a
safety concern and then sealed with silicone on top on the weld. http://www.ssr-wheels.com/technology/

my vienna dish's are the same way.

[VEEMDUB]

Heres a picture I found on here of a similar wheel, not the wheels I am buying. I will be requesting better pictures from the seller of the actual wheels.

[AMGwheelwhore]

Alot of Jap "3 piece" wheels are welded and are actually two piece, found that out the hard way...

[staystetti]

2pc are welded, if they're 3pc they will have bolts showing.

No.

these are the wheels

Pictures of the backside would be nice

[Schultz28]

these are the wheels

[Counteract]

2pc are welded, if they're 3pc they will have bolts showing.