Need Pictures: Mounting Pad of 17x8.5 Borbet Type A

[cobrawannabe]

I'm looking at buying a set, but they're et13, which is not exactly friendly to my car. I need a couple of shots of the mounting pad so I can get an idea of how much can be taken off. I'd assume these have a pretty thick pad, since they're one of the lower offsets that this width is available in, but I need to be sure before I pull the trigger.

Thanks!

[Spatakula]

Example taken from a 16x7.5 5x120 et20 buuuut the mounting pad should be all that different. Would imagine it would be less from the example above.

Still digging for ya broski!

-spatakula

[Spatakula]

I imagine you are still keeping the 4x108 pattern? Here is a pic of a Type A in 4x114.3.



At lease you have an idea with what you may be working with...

EDIT: Specs on the wheel above are 16X7.5 et20

-spatakula

[cobrawannabe]

Thanks, Shawn!!! I am sticking with 4x108, yes.

[Spatakula]

No prob. Pretty much exhausted any type of google search and still haven't found a legit pic. Hopefully someone will chime in...

-spatakula

[cobrawannabe]

Yeah, figured I'd post on here since Google didn't give me much, either.