.:: PHOTOSHOP PLEASE - STANCING MY M3 - Need your help with fitment ::.

[.::M::.]

Read above, I decided on Work Meister S1s

[Kielan]

Why are you buying reps....

[.::M::.]

That will give the fitment I want even with my flared rear fenders?

[Rebounder]

Meisters! 11 et +5 in the front and 12 et +5 in the rear... 5mm spacer in the front 3mm spacer in the rear. someone correct me if im off.

[.::M::.]

Thanks for the links everyone, I sent a PM about making a donation to photoshop it all I believe I will go with work meister s1s instead of varrstoens.

Jorge - That is a great stance, do you really think that I could do 10.5s on the front and pull it off???

[Jorge]

http://www.stanceworks.com/forums/showthread.php?t=12598

http://www.stanceworks.com/forums/showthread.php?t=4944

Pretty much what you are after, except in 19" wheels?



18x10 et0
18x11 et-12

So I'd go for 10.5s all round, ET0, then the fronts will go straight on, and you can space the back out to what you need, like 15-20mm or something (unless they can make them with a negative offset for you)

Maybe not ET0 on the front actually on a 10.5, ET5-7 maybe?

[LronSigh]

http://www.stanceworks.com/forums/showthread.php?t=15345

[.::M::.]

I havent ordered any yet, that is the point of this thread...I want to know what to order, from someone that really knows their shit about fitment.

my rear fenders are wider than the fronts from the factory, and since then have been widened 1.5" on each side in the rear so 10.5" all around may not be possible, needing help

[Rebounder]

They are 19x9.5 +12 and 19x10.5 +0 in 5x114 and must be redrilled to 5x120 - fully polished TE37 reps...any thoughts?

should've gotten 10.5 all around

[.::M::.]

They are 19x9.5 +12 and 19x10.5 +0 in 5x114 and must be redrilled to 5x120 - fully polished TE37 reps...any thoughts?

[.::M::.]

Other images of similar fitment that I would like to achieve :

PERFECT


Maybe a few mm more aggressive



a little more aggressive all around, more poke

[.::M::.]

Varrstoen just emailed and said they can offer me, but dont advise it as no M3 has bought them for the rear : 19x9.5 +12 front 19x10.5 +0 rear. I told him that my rears are 1.5" wider on each side than the oem fenders, so my wheels need to come out 1.5" more than any other as is, plus I want more aggressive fitment than the other M3s are running as is

[.::M::.]

Varrstoen states that I can have the 5x114s redrilled to be 5x120 and +12 if I want

[.::M::.]

My apologies, my knoledge on wheel fitment is next to one

Fronts :

Varrstoen recommends for oem m3 - 19x9.5 +20
I want it as aggressive as possible, I want to poke wheel and tuck some tire...below you will see the fitment that I am going for but possibly even slightly more aggressive all around, only on my M3. So I wouldnt mind if it were possible to do a less aggressive offset and a wider front wheel.

Rear : Varrstoen recommends for oem m3 : 19x10.5 +22


Please keep in mind that my rear fenders are 1.5" wider on each side than stock - EDIT, its 1.5" wider on each side not .5"!

I dont mind running a spacer. Varrstoen says that the rear sizes listed above are the widest most aggressive wheel they offer for my bolt pattern, however they said I could run a 5x114 bolt pattern on rear with an adapter and get a more aggressive offset for a more aggressive fitment if need be.

Varrstoen "5x114.3 adapter. +12 is pretty aggressive"
Old wheels are - 20x8.5 20x10.5 Modsport mesh wheels

[Zic]

you are missing some facts there, is this 5inch wheels, 22inches? what offset did you order? etc etc etc, how do you want it to look? poking rim and tucking tire? etc etc.

be more specific.