What is your favourite wheel and why?

[kyoo]

ce28ns... which is why i'm here

[DuaneJ19]

It really depends on the car but right now I'm really liking the OZ Futura; although there were some Cragar that I saw recently that were pretty sweet.

[SimonMayers]

I like Pro Comp Alloys Series 69. It is one of the best wheels designed for use off-road. The company designs the model using their low-pressure casting technology to deliver above average wheel strength with a highly-rated design finish. The clearance on the wheel is made to support the brake clearances for modern SUVs, trucks, and Jeeps. The Series 69 weighs 16 pounds, and the model is 17.3 x 17.3 x 10.3 inches in size with a single piece cast construction. The rim diameter is 15 inches and width is eight inches with a bolt pattern of five. The backspace of the rim is 3.75 inches and the bore diameter is 83.01 millimeters.
driving directions

[Miatafanatic77]

What is your favourite wheel and why

Im trying to figure out what wheel offset everyone has with 20 inch rims and what width wheel. I picked up some 20x8.5 with 40 offset because I thought my rims now were35... that wasnt the case. Theyre 18. Im trying to visualize with the larger offset would look like. Post up pics of your wheels and let me know width and offset.

[D876]

OZ Futura / Keskin kt1

[RomaRIO]

Zender Turbo phase 1 - Classics never die

[dubmax]

RH ZW1



Carline CM6





OZ Futura




That's my top three.

agree 100% with you
Oz Futura
fastivus0110 by Max Chinolla, en Flickr

Carline cm6
Pacifico148 by Max Chinolla, en Flickr

CARLINE CM6 4 X 100 RADINOX LIPS by Max Chinolla, en Flickr

[sponcar]

1-Hartges
2-Carline CM2 then CM6.

Hartge in my old car.

[prasina2]

No. 2 wheel...ATS Type10. Just a great one-piece sport wheel with clear motorsport heritage, looks great on European cars.


And of course, BBS RM 006's because bad ass

[a112]

Centerlock E50's because they were high-tech.

[Oh Damn, it's Sam]

Depends on what it's going on, of course. But, if someone threw me a pile of money, I'd have a hard time not swapping out the MAEs for these:

[zoo]

17x10 5-Zigen FN01RC in matte-black.......my holy grail of wheels. Someday i'll own a car that can pull them off.

Might as well go for the forged version, if its holy grail status.

I do not have a favorite wheel.
Quite fond of the pre-buyout Kinesis wheels. Also like the BBS E88.

[harlerocco]

this topic stresses me out too much.

raincheck.

[OSSHWA]

17x10 5-Zigen FN01RC in matte-black.......my holy grail of wheels. Someday i'll own a car that can pull them off.

[robertw]