Test fitting the wheels..

[Pierre3400]

Hey guys,

Finaly got a chance to try and fit the new wheels today!

Needs a good roll on the rear


BIG >> http://peecee.dk/uploads/092010/Photo11.jpg

BIG >> http://peecee.dk/uploads/092010/Photo2.jpg

BIG >> http://peecee.dk/uploads/092010/Photo31.jpg

Specs:
Front: 8.5x17 et15 with 205/40-17
Rears: 10x17 et15 with 235/40-17

Comments are welcome!

UPDATE:

Been working on the car today, so far so good. One wheels seems to fit good after a few hours of work


BIG>> http://peecee.dk/uploads/102010/02102010152.jpg

[SeanDub]

Fitment looks good, I probably would have gone with a 225 in the rear though

[Pierre3400]

Fitment looks good, I probably would have gone with a 225 in the rear though

I did want it, but the price of 1x 225/40 was more then 2x 235/40, and i also 225 is abit to much stretch for my liking. Im just going to roll it, and hopefully be happy with the stance.

[SeanDub]

Keep us updated

[Sam_bmw]

Omg you got the same e36 as mine . 2 doors and the same colors with the same mods as mine except the beautiful fitment ! i got clears corners two but i feel is look more propers with ambers !!

[schroedin]

Looks like you might need some pull with the 235s on there, should look good though.

[projektzwo]

^ yeah i think that only with rolling in that case will not help you much...

but however - grat looking e36!

[Pierre3400]

Omg you got the same e36 as mine . 2 doors and the same colors with the same mods as mine except the beautiful fitment ! i got clears corners two but i feel is look more propers with ambers !!

Well, i have had the same idea, Ambers do work with this car, but i do also like the clears. But i have seen many with ambers, that made it look hot!

^ yeah i think that only with rolling in that case will not help you much...

but however - grat looking e36!

I have spent hours thinking of how im going to do this, i will agree i am going to have to do somthing, but since i dont want to go allllll the way out to where the lip of the rim is, i think i can pull it off, but not without needing to paint it. If i cant roll em to where i want, then ofcourse its gonna need bodywork, and it will happen if needed. But to start off, imma try and roll it.

[wagener]

Try rolling the upper fender if you can, it would pull it out more, some fenders will be able to some will not... a normal roll of the lip section isn't going to do too much for you. I think it would look good with some negative camber though

[projektzwo]

ofcourse you gotta try, and if it won't work i suggest you to modify the camber, i think that it'll be easier than the bodywork...

keep us in touch

[Pierre3400]

Update

[Eric the Ricer]

Camber should do the trick

[Pierre3400]

Camber should do the trick

No tricks needed

http://www.stanceworks.com/forums/showthread.php?t=10979