The BBS RC 090/BMW Style 5 wheels thread

[dubfordstyling]

Can anybody tell me the centre / face diameter size of a RC040 please?

[p4ddy]

hey guys,
anybody in here ever had the rc040 (7.5et41) and rc090 (8.0et20) centers compared to each other? or having them lying around and can put them next to each other on the hub to make a picture? I wanna do a 3pcs conversion and I'm curious if there are differences.

[Sotam123]

Its a shame thoose cost moore then a fresh set of 17x9 Rc rims...
Got my "rs" waffles in plastic for 15 euro...

same here i payed 400 for my rc090s on the above picture and 30$ for my plastic caps..everyone kept sending me the link for these metals ones..but for the cost ill live with the plastic ones..

[ViktorSwe]

Its a shame thoose cost moore then a fresh set of 17x9 Rc rims...
Got my "rs" waffles in plastic for 15 euro...

[1badg35]

for those of you who have asked me over the past few months on here, I figured I would also post up here in case I missed someone (pretty sure i missed a few people who asked). The second production batch of the billet style 5 waffle plates/hex caps for this year is just about complete.
the last batch was gone in under 30 days, hopefully the larger batch this time lasts a little longer. well ideally not but you get the point haha.

http://spinfab.bigcartel.com/product/bbs-style-5-custom-waffle-plate-hex-combo-new

here are a few pictures with some powder over the parts since its hard to tell perfectly machined parts without seeing them finished and on a wheel.







hope the mods don't mind the post as I am usually not one for marketing driven posts. If they do, feel free to remove the post or adjust as necessary. Not looking to violate anything

[Sotam123]

just finished my set.
mirror polished lips, nickel plated hardware, powdercoated centers and caps.
before:


after:

[oakgreenwithenvy]

Face mounted bbs rc040 7.5x17
20mm spacers up front
55mm at the back

[Schlander]

Here's my E30 with redrilled style 5's 17x8 and 17x9.

[Cadaverous]

BBS power coated gold centers with polished lips.

[H3nxu]

Aaand here we go again..





These are all RC035 8". Going to mint condition ofc.

[FredRC]

What I did that worked was placing a block of solid wood on top of the center and hit it with something heavy. It may help to spray some wd-40 to penetrate and make it easier to remove. It will come out eventually.

[kosso_olli]

Hey guys,
I am currently rebuilding my BBS RC035 and RC039 (similar to RC090, only wider) for my E32. I removed the nuts and got rid of all the bolts, but I cannot seperate the centers from the beds. Is there a trick to make it work? I ran out of ideas, as I don't want to use brute force.

[dieseldubber]

[ViktorSwe]

Sooo....here we go!
Milled down backside of the faces to fit 100% facemount.
Gonna be 7,5 et58



Paint, polish and bolts here next?

[Classice30]

Changed the staggered 18"s for some staggered 17" which I had redone...



Looks loads better!!!

What are the specs of the wheels and tires please. Your car look amazing!