BMW e30 from all over the world Appreciation thread

[Deltron]

Oooh, I wouldn't mind a set of those. I'll be more than willing to test them out for you guys, too.

Also, Japan always doing it better.

lolno. They do their own cars the best. They should just leave E30s alone over there.

[Withers]

This thread gets me excited...

makes me wonder if we should build a Zero Clearance System for the E30 .. hmmmm

You'd probably only need to alter the fronts on the e36 set slightly and give us some super stiff springs for the rear and you'd be done

I could probably drag frame in the front with my shortened GC's, but the rear is as low as I can currently go (I want to go lower damnit).

[OOMPH!]

Meh daily Cah....this was just a quick test fit. Will be completed in spring for warmer weather, currently rolling on stock weaves.
Front 16x8.5 et5
Rear 16x9 et-1
KW Coilovers

[famguy]

Wheels on pic are sold, but 4 new sets are bought and are currently under construction

[thehillshavestis]

This thread gets me excited...

makes me wonder if we should build a Zero Clearance System for the E30 .. hmmmm

i will buy a set not even owning my e30 yet. i promise

[Zic]

Meh daily Cah....this was just a quick test fit. Will be completed in spring for warmer weather, currently rolling on stock weaves.
Front 16x8.5 et5
Rear 16x9 et-1
KW Coilovers

Drool worthy, RS211 that are rebuild?

[Tonys18t]

good stuff

[63ard]

just a clown

[OOMPH!]

Drool worthy, RS211 that are rebuild?

Thanks! They are RS039 rebuilt, so they have the 5 inch inner barrells

[Zic]

Thanks! They are RS039 rebuilt, so they have the 5 inch inner barrells

Hm, what stock specs are they? 5inch barrel, 0,5inch face, and what lip and et?

[OOMPH!]

Hm, what stock specs are they? 5inch barrel, 0,5inch face, and what lip and et?

The RS039 stock specs are 16x7 et24, 4x114, 5in barrel, 0.5 face, 1in lips.

[Zic]

The RS039 stock specs are 16x7 et24, 4x114, 5in barrel, 0.5 face, 1in lips.

Would that not make them 6,5, with a 5inch barrel,0.5 face and 1inch lip?

[rasta_yute]

bump

[FiNTO_e30]

original look, 40/50mm lowered

[Deltron]