layed out............

[Oxer]

18 is the legal drinking age down here

I shall await pics.

[FittedDownLow]

thanks for all your help man if i was 21 and lived in austrailia id totally take you out for a drink haha

[Oxer]

As for a 15x7 -6....

7" is 177.8mm, dead center is 88.9mm from center to outside lip at 0 offset. if its -6 offset its 94.9

add the spacer it becomes 133mm which is 6mm further out than a 10"wide at 0 offset.

[Oxer]

put it this way..

8 inch = 203.2 millimeter

10 inch = 254 millimeter

at dead center 8" is 101.6mm and 10" is 127mm which leaves you with 25.4mm difference.

if you have an 8"wheel with a +6 offset, you have 92.6mm from the center to the outside lip

Now add 38.1mm which is a 1.5" spacer, you get 130.7mm which is 3.7mm more then a 10" with 0 offset.

Im pretty sure those calculations are accurate...

[FittedDownLow]

yea he doesnt have a -30 something offset though haha. Also its what i want to do i just needed a little motivation and beings that your the only one who hasn't completely doubted me i trust your opinion haha ordered in 15x8 with a +6 et all around and 1.5 adapters i looked at it on those visual calculators and its gonna be awesome haha

[Oxer]

Well.. considering theres that white hatch on here that is tucking 10" wide rims in the rear.. Anything is possible with a bit of work..

But you have to be prepared to put the work in if thats the look you're chasing. Dont just do it cause I said to..

[FittedDownLow]

if you think it MIGHT be possible im going to make it happen

[Oxer]

You'd get the 8"s to work with a bit of camber... Im guessing its gonna look pretty awesome if you do?

[FittedDownLow]

oh damn lol well let me see if i can find a larger offset haha if not i guess im going big or going home

[Oxer]

So it would be either 15x8 -37.5 or 15x7 -43.5

If the spacer is 1.5" aka 27.5mm roughly..

Id say you'll have better chance fitting the 8"s...

[FittedDownLow]

no you have to add the spacer on top of the offset

[Oxer]

Are those offsets you posted including the adapter?

[FittedDownLow]

so i noticed something about the wheels i ordered and have a quick question for you guys im running 1 and a half inch adapters and need to know what size wheel i should get its either a 15x8 with a +6 et wrapped in 195 45 15's or a 15x7 with a -6et wrapped in 175 55 15's decisions decisions

[Oxer]

Not till legitness is on.


@ jake. Look in off topic for the thread "Stance Rant". Read each page, especially the part about how fake/copied wheel companies tarnish the reputation and bring down the real wheel companies. Its more then just looks buddy.

[FittedDownLow]

jake haha that's my name too, some people just pay lots of money for there wheels and **** to see that we bought similar wheels for a quarter the price

rotas are also much cheaper and weaker but they have been making better wheels over the years including stronger and lighter but im getting rid of them asap

any more comments on the car????