STANCED Beetle Build

[Dane]

hurry up dammit, i want to see this thing. i want a beetle.

[Pure Euro]

Car is in the air, wheels are off, and we're ready to install!

[Richard_Gud.]

YAY. can't wait.

[SVT1131]

Damn I can wait to see this done!

[herrakani]

You got the 1,8T-version? I had the diesel one.

[Pure Euro]

Jesse is busy grinding down the tab (the ring around the bottom of the strut) to allow MAXIMUM drop. This coupled with my frame-notch will get me ~ 1" lower than someone without either

[Pure Euro]

Finally have my custom Adaptec 5x112/5x100 adapters in my hands! They are 15mm fronts and 22mm rears... if I've done my math correctly, these wheels will sit perfectly.



They come with all the hardware I'll need to get these wheels on.

[Pure Euro]

While Jesse is drilling the holes in the strut tower for the front struts, I wrapped all of the fittings, etc with teflon tape to ensure a solid seal once they go in to the pressurized parts... a HIGHLY recommended step!

[74low145]

Sick <3

[Brian@Rotiform]

Noice

[schroedin]

So sick!

[Pure Euro]

Concerned about the offsets now... We'll see.

[2.slowT]

Good work, subscribed.

[Pure Euro]

[H5G]

put that bish awn da ground...