Tweet
Me and my friends decided to go about lowering a MK3 fiesta we had lying around the yard. the car was going to be scrapped and said we would give it a good send off before it is scrapped. its a 1.3 sfi standard car with some small rust issues but runs and drives well.
we firstly lowered the car by cutting some coils off the springs but didnt quiet get it low enough so we decided to completely take the springs out just to see how low it can go and it sits only a few inches off the ground now with the wheels tucked inside the arches might raise the back slightly and its sits lower than the front and not a big fan of the reversed rake look.
some future plans are to maybe rust the bonnet and other panels possibly not really sure yet. also in the process of making a side exit straight exhaust and might also get some alloys or banded steel wheels and flare the arches. Opinions and possible ideas on what i could do to the car are more than welcome excuse the poor pictures but i will try and get some proper pictures of it if i can.
we firstly lowered the car by cutting some coils off the springs but didnt quiet get it low enough so we decided to completely take the springs out just to see how low it can go and it sits only a few inches off the ground now with the wheels tucked inside the arches might raise the back slightly and its sits lower than the front and not a big fan of the reversed rake look.
some future plans are to maybe rust the bonnet and other panels possibly not really sure yet. also in the process of making a side exit straight exhaust and might also get some alloys or banded steel wheels and flare the arches. Opinions and possible ideas on what i could do to the car are more than welcome excuse the poor pictures but i will try and get some proper pictures of it if i can.
Comment