Any room for a Speed 3 from DC?

[Oceandrive-Phat]

Those are evo x enkie

I meant to say GSR, there are 2 Evo X's, the GSR and MR.

[mrg7243]

I meant to say GSR, there are 2 Evo X's, the GSR and MR.

Ah gotcha. I knew that I was just going off what you said, I am a mitsu fanboi.

[Oceandrive-Phat]

Project bare metal evo x wheel begins.... AND ITS FREAKING ROUGH...

Before project started, thought I would be ambitious doing two at a time.... learned quickly was not the case



Theres metal.. or alloy...

[themandillon]

I really want another speed3... Looks good as is, but some more fitment would be proper.

[BoostedA408]

Don't listen to that guy, he's on racelands, rotas AND he says yolo.

this

[coconutt]

There's always room for anybody, but there needs to be no room under your car.

Btw Sean... <3

[BoostedA408]

i had to

[Oceandrive-Phat]

This is back breaking labor....

bare metal wheel project is looking like it will be replaced by bare metal spray paint


Does any one know of spray paint that looks like bare metal?

[SeanDub]

Stripping a wheel is labor?

God help you if you ever try something hard, like polishing.

[Oceandrive-Phat]

Stripping a wheel is labor?

God help you if you ever try something hard, like polishing.

ohh!!! then tell me what you use and techniques?

[RubbaDubDub]

Trying to convince my buddy with his Mazdaspeed to stance his out

[SeanDub]

ohh!!! then tell me what you use and techniques?

Aircraft remover and waiting. It literally does the work for you lol

[Oceandrive-Phat]

Did a little test fitment..




Not a lot of space between the back of the wheel and the coilover, do I need spacers, there is about a finger width space?

[Chuckdee]

you should have lowered the car under some wood block or planks to get a better idea of how it'll look like. You really can't tell from it being that high. For wheel stripping/polishing.....it's a lengthy task but it's not something to be rushed. Just google it and you'll find out how to do it. but so far, you're on the right track.

edit: if there's a fingergap of space, I wouldn't worry about it, but it doesn't hurt to get spacers for a flush fitment