My Stanced 2G Eclipse

[EricT93]

picasion.com/webcam-to-gif

[s2k-13]

If it ain't Adidas fu.

[Chuckdee]

Looks legit! I'm surprised the 18x9.5's can fit under there. although I'm interested in seeing how 18x10's all around can fit.....

[EricT93]

If it ain't Adidas fu.

Bahaha

Looks legit! I'm surprised the 18x9.5's can fit under there. although I'm interested in seeing how 18x10's all around can fit.....

Thank you sir! As far as 10s, they have to have very low offsets for eclipses, my coiliver and the inside lip of the wheel are dangerously close lol.

[Mattphi]

Always liked this model, but I can't say I like the wheels. Rota FTL.

[Dyesuperman]

Looks legit! I'm surprised the 18x9.5's can fit under there. although I'm interested in seeing how 18x10's all around can fit.....

I'd say it can be done..I run 18x9.5s as well exceptin a +35 offset with a wider tire. If someone were to get a 18x10 in a +28 or below it should clear theoretically (add .5" total so .25" each side which is about 6mm, so subtract 6 from 35 and you get 28 to be safe).

I know I have said this before, but I am jealous how much lower you can go than I :p

[EricT93]

Always liked this model, but I can't say I like the wheels. Rota FTL.

Thanks for the opinion, to each his own.

I'd say it can be done..I run 18x9.5s as well exceptin a +35 offset with a wider tire. If someone were to get a 18x10 in a +28 or below it should clear theoretically (add .5" total so .25" each side which is about 6mm, so subtract 6 from 35 and you get 28 to be safe).

I know I have said this before, but I am jealous how much lower you can go than I :p

It depends on which suspension you're on, depending on the lowness and amount of camber, the inside lip of the wheel can hit the coilover assembly. All about the setup I guess lol.

[Dyesuperman]

Thanks for the opinion, to each his own.


It depends on which suspension you're on, depending on the lowness and amount of camber, the inside lip of the wheel can hit the coilover assembly. All about the setup I guess lol.

You would have to run a shit ton of camber to hit lol, at least in the rear. I have about 2-3mm clearance between tire and knuckle and 2 inches to the coilover...yours must be different lol...lowness shouldn't make much of a difference either since the coilover assembly stays in the same spot

[HEcreated487]

Surprisingly different (in a good way). Well executed. Liking that front windshield banner/decal. Have any "extra"?

[NickBroderick]

I like what you did with it, clean and simple!

[EricT93]

I like what you did with it, clean and simple!

Thank you sir!

Surprisingly different (in a good way). Well executed. Liking that front windshield banner/decal. Have any "extra"?

Lol thank you sir! Unfortunately I don't have any extras but you are welcome to have one made. No copyright or anything on the design

[bart taylor]

lately been looking at getting rid of my E46 for another DSM, miss it. looks good.

[Schultz28]

definitely looks pretty good especially for an eclipse! not too many ones done up right!

[EricT93]

lately been looking at getting rid of my E46 for another DSM, miss it. looks good.

Yea man they're cool little cars!

definitely looks pretty good especially for an eclipse! not too many ones done up right!

Thanks!

[Ska Dub]

I rarely see these cars cleanly modded but i love when i do. looking good!