New Wheels....again....Work

[punkhop83]

Not to shabby. Waiting for real pics

[Silverspooler]

diggin it, always wanted a set of those!

[TheBigBang]

15mm adapters are sketchy. you really need 20mm (minimum), if thats the case you'll be at et10 all around. you can pull it off especially with a 205/40/17 all around. 40 sidewalls look small on mkivs so, just go super low and you'll be golden.

good luck!

[gumballer_80]

heres one chop i did not much different from yours but i dropped it a lil more
oh and it better look like this when finished. it has so much potential with those wheels.

Yes

... Please.

[ShanesG]

Not really feelin it, all i can think about is this looking at those

[Neb]

15mm adapters are sketchy. you really need 20mm (minimum), if thats the case you'll be at et10 all around. good luck!

are you saying this because the internet told you so or because you actually have run 15mm adapters and had problems.

15mm adapters are fine. I've run them on my last 2 sets with no issues at all. If they're made correct they're fine. (bigger flatter heads on the bolts to attach to hubs).

I think you'll be good with 8" et 15 up front. just run stretch and possibly camber if needed

[Joe Flacco]

Hey thanks guys, and Dubmd thanks for the pchop, I hope I can pull them off lookin like that. Pretty sure im gonna go with the 15's all around. Im not afraid of a little poke. I prolly wont be able to go low enough with 205/40s so ill prolly start of w/ 205/45s and go from there. And im not really worried about rubbin a little. The steelies rubbed like crazy since my rear trailing arm has been shifted a few mm's to the right, so my passenger side rubbed like hell. There really isnt any paint left to rub off.

[BeemerBuyer]

Legit. I like em more than teh steeliz.

The before and after pics are in the exact same spot? LOL

[WhiteStripes]

Never seen those wheels before. Definitely remind me of Daytons, excited to see the outcome.

[Joe Flacco]

Legit. I like em more than teh steeliz.

The before and after pics are in the exact same spot? LOL

lol the after pics are only photoshops, the wheels will be here in 2-4 weeeks

[Mateen9]

I saw you pulling in to school before my last final but you disappeared as I was following you at a safe distance...

[1985zcar]

I've always ***** Emitz. lol.

I guess it's better than the steelies, but not a fan either way.

[Joe Flacco]

Everyones got an opinion buddy, its all good

and Mateen9, was that you when we were pullin in in the White bimmer? I like your ride, definitly dig it. Yeah I just pulled right into the lot to the library. We should meet up someime and take some pics.

[LuckyBoyOne3]

Looks good.

[00bmw323]

not bad...