G35 Coupe 19x11 Front & Rear

[blowntwofive]

I love g35s in that color id say get the wheels just a bit more flush like maybe 3 more mm and it be perfect

[smoky0937]

The wheels compliment the car so perfectly. Everything flows just right. super sensual.

[yusoslo]

Thanks for the compliment! It is Air craft stripper that you can get at auto part stores. I recommend googling how to polish aluminum. I started w 400 grit and went through the stages wet sanding 400,600,800,1200,1500,2000,3000 then 0000 steel wool, then jewlers rouge on a drill, then mothers polish, then poor boys wheels sealant.

The wheels where purchased directly from Varrstoen.

[BlackG35]

What kind of acid was that? Can you provide me a thorough explanation of how to polish those wheels?
Again nice G!!

[BlackG35]

I am new to the forum, and this g35 made me join it!!!! Nice look man!!
Can you also help me out with this information I would appreciate it so much.
Where did you purchase these wheels? since they're rear wheels only.

[yusoslo]

Well that's unfortunate

He Pm'd me the same question so I replied to that first.

Its not any secret. I feel like I posted all the info already in this thread
350z Eibach Sportline springs
19x11 +15 wheels
15mm spacer rear
3mm spacer front
245 front
255 rear
fenders rolled and pulled
natural camber, toe only correction
no rubbing evah!!!!

Wheel refinishing 101:
Take new wheel
mask off face
Apply acid to lip
remove acid and clear coat
wet sand with WD-40
start 320-400-600-800-1200-1500-2000-3000-0000 steel wool - jewlers rogue and polishing pad on drill bit, hand polish, seal with Poorboys wheels sealant.
Enjoy 4 hours per wheel and bleeding hands for days.

[Pyropiggy2.5]

Thanks I PM'd you back all the info.

Well that's unfortunate

[yusoslo]

I have a lot of questions for you lol I am ordering these wheels probably next week but I'm nervous about getting 19x11 for the front and rear.

1) What springs are you on?
2) How in the world did you refinish those lips? that looks sick!
3) fenders rolled and stretched?
4) what offsets and tire size?

If you could help me out I would really appreciate it. Your the only other person that I have seen that has gone 19x11 all the way around so any reassurance would be greatly appreciated!!! lol

Thanks man!

Thanks I PM'd you back all the info.

[a.soetaert]

Your rims looks great...Wish i had some step lips

[oshkoshbajosh]

O and also do you have a camber kit or no?

[oshkoshbajosh]

I have a lot of questions for you lol I am ordering these wheels probably next week but I'm nervous about getting 19x11 for the front and rear.

1) What springs are you on?
2) How in the world did you refinish those lips? that looks sick!
3) fenders rolled and stretched?
4) what offsets and tire size?

If you could help me out I would really appreciate it. Your the only other person that I have seen that has gone 19x11 all the way around so any reassurance would be greatly appreciated!!! lol

Thanks man!

[yusoslo]

11" front and rear. +15 offset wheels with 3mm front and 15mm rear spacers

[DCJodon]

I've been looking at getting a set of these in 10.5/11 for my Z. Yours are the 0 offset sizes correct?

[Yarberrymt]

I'm not sure why more people don't go with rear wheels up front with off the shelf wheels.

Makes such a difference.

[yusoslo]

What tires and sizes are you running on the G?

245/35 Front and 255/35 rear. Hancook V12