Widebody 2nd gen Lexus GS

[laextreme5]

Thanks. I still need to schedule an alignment with you. I would have asked about this weekend but I realized that I don't want to drive all the way out there without a spare tire that fits over the front brakes. I just ordered a spare and hopefully it arrives some time before next weekend so I can come down there.

Just shoot me a message on facebook bud, name is Cody Rinaudo and we can set something up!

[honeybadger]

Car is looking good man!

Thanks. I still need to schedule an alignment with you. I would have asked about this weekend but I realized that I don't want to drive all the way out there without a spare tire that fits over the front brakes. I just ordered a spare and hopefully it arrives some time before next weekend so I can come down there.

[laextreme5]

Car is looking good man!

[honeybadger]

Not much going on with this but I did get the front brakes upgraded.

[Brae399]

So clean

[rice4life]

Most likely no. But if I get bored enough a 2jz-gte is possible. I would want a single turbo conversion though, so not cheap.

GTE is a waste unless you really want twins. Just slap on an OEM GTE headgasket and it'll drop the compression to 9.2:1, secure it with ARP studs and you'll have something good for 500whp+. I've done the HG swap on a couple NA-t cars, and it's a much easier route than doing a full swap. Then CXracing sells a generic 2jz kit for the GS, I'd get the turbo rebuilt and have the wheel balanced tho.

[honeybadger]

Do you plan on working on the engine at any point?

Most likely no. But if I get bored enough a 2jz-gte is possible. I would want a single turbo conversion though, so not cheap.

[rice4life]

Do you plan on working on the engine at any point?

[honeybadger]

God damn

Love me a good gs and this thing sits meaaaaaaan! e46 m3 are sick but this car has way more character.

Gotta find a way to bring aristo or atleast the full 2jz set up from one and make big power! zuuututu

Thanks. It was just a thought. Doubt I could get enough coins for it to get into a decent M3 anyway.

Car looks great!

Means a lot coming form you!

This is incredible!
Any engine mods?

Nope, all stock, 12.5 rear wheels for 225 hp

For anyone wondering, here's a another shot to show the fitment.

[rice4life]

This is incredible!
Any engine mods?

[white out]

Car looks great!

[cressidodd]

God damn

Love me a good gs and this thing sits meaaaaaaan! e46 m3 are sick but this car has way more character.

Gotta find a way to bring aristo or atleast the full 2jz set up from one and make big power! zuuututu

[honeybadger]

So here are some really poor quality pictures of where I am right now. Finally got at alignment and front camber is set at -3.6 while the rear is at -2.6. So far I haven't smashed my front fenders so that's good. It's a little higher than I (and stanceworks) originally wanted but I'm fine with it. I want an E46 M3 now, I should sell this....

[honeybadger]

double post

[Asshole Bicycle]

Damn, son. That looks amazing.