spindles were out for delivery today so i went ahead and pulled the truck apart. should be back together and down on the ground tomorrow morning sometime. then it will go back up once my pinion angle shims show up! i apologize for the god awful pictures. i sold my good camera a while back. i always use my phone but ill try to start using my point and shoot more.
Announcement
Collapse
No announcement yet.
Truck stuff and things
Collapse
X
-
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
-
trucks all back together. i scraped a few times on my test drive.
it feels so good to be back at an unreasonable height!
Last edited by storey618; 06-30-2017, 02:57 PM.
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
some better pictures. the rear looks alot weirder in pictures than it does in person.
it will be sorted eventually, just have to aquire the funds for some zq8 springs.
they are currently sitting at my local junkyard waiting for me
Last edited by storey618; 06-30-2017, 02:58 PM.
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
Originally posted by BozoBubble View PostI can't quite put my finger on it, but there's something I really like about that maroon Subie. Is it packing any big mods under hood?
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
spent my morning changing my front brake hose. last night i went to leave work and the driver side decided to be like my fuel pump and peace out. also noticed when my dad sat on the truck bed it squatted in a pretty dope way. hopefully the camper shell im gonna be putting on can get me some cheap haggard low lol
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
not much of an update, starting to peel the plastidip off the grille so it matches the wheels,
the picture was kinda funny next to a stock height 4wd ranger
and then my dad shared this today, yall remember osiris shoes? lol my first truck in the garage. 1987 s10, 1 of the 5 ive owned. im like 15 in that picture. i dont know if anyone knows what i look like now...but its not like that.
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
so the trucks been down since last friday.
i installed my pinion angle shims just to find out that they shoved the driveshaft all the way into the transmission. so i ordered some set back plates.
they came in this morning so i got everything buttoned up.
the grind still happens in second gear very lightly so ill probably get the driveshaft shortened soon.
i also painted some tire letters
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
i have not known what to do with myself at work with stanceworks being down!!!
not much has happened with the truck. mostly just been helping others with their shit. roll my buddies rx8 fenders with a bat because im a hood kid...i guess
then cleaned up under the hood. it looks even better in person.
only other things are replacing the clutch on my fan, and some valve stem caps. because are you really ballin' if you rock those black plastic caps?! currently have money burning a hole in my pocket so i may end up going and picking up those zq8 lowering leafs sometime this week. they will lower the rear another 1.5" also i found a 4:10 rearend for $40 but the dude wont fucking text me back! we shall see how things play out
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
That color matched grille did wonders for the front end. Looks about 100x better than before, imo.
'87 Porsche 944 S | Ex-E36 Touring (2009 - 2016) | Daily: '02 Chrysler Sebring
www.bastienbochmann.de | Tief & Breit
Comment
-
Originally posted by Dr.AK View PostThat color matched grille did wonders for the front end. Looks about 100x better than before, imo.
Originally posted by BozoBubbleStance bug bites hard, man, you ain't gonna shake it.
Truck Build
Instagram: somestancekid
Comment
-
This is really coming together. The teal grille looks dope, and the white detailing on the tires brings to mind the Camping World Truck series racers. Loving it so far.
BTW, when you get ready to purchase a bumper/roll pan you should check out LMC Truck. Their head office is like a 10 minute drive from my house and they make really high quality products.They might have repro'd ZR2 Fenders, too.sigpic
Comment
Comment