Announcement

Collapse
No announcement yet.

6-Lug CTS-V Struggle to Stance

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 6-Lug CTS-V Struggle to Stance

    So I'll start off with some basics on my car. It's an 06 CTS-V that I plan on "ruining" with fitment.



    It's my daily and the stock wheels have done me well but it was time for a change.
    With the bolt pattern being 6x115, my options were to either find a set of wheels with that uncommon bolt pattern or swap to C5 wheel hubs and run some 5x120 wheels.

    Originally I was going to do the 5 lug swap, but then I stumbled across some 6x115 19x8.5 Asanti AF112's that were made for the V's back in the day. I picked them up for $100 from a good friend who's brother in law had them sitting in his garage from his last V.





    I liked the styling, but the full chrome and poor offset was far from my style. That's where I stand now. With all of the tires dismounted, break down of the wheels has begun.




    The faces will be powder coated gunmetal gray (see Supra photo), the 1.5" lips will remain in the front and the rears will be getting a 3" lip to make it a 10" wide rear wheel.






    The car currently sits on KSport coilovers with Swift springs and almost every rubber piece on the car has been replaced with polyurethane.




    Enjoy the progress pics. Also, sorry for the massive pics, ill fix it next time.

  • #2
    Pics are actually alright, now if you could use a smaller font that's also not orange, would be easier on the eye.

    Comment


    • #3
      Oh boy, this will be nice. I think these look SO good on stock wheels, slammed. That first picture is great.

      2001 BMW 560i 6.0 LSx/T56 SOLD


      2000 Corvette Hardtop FRC

      Comment


      • #4
        Originally posted by jackies View Post
        Pics are actually alright, now if you could use a smaller font that's also not orange, would be easier on the eye.
        x2,

        plans and wheels look really good tho.


        i shouldn't be daily driving this:
        "Volkswagen Golf mk1 build thread"

        Comment


        • #5
          I just finsihed up some work on one of these for a buddy of mine. such a funky bolt pattern. He has these VIP Modular wheels for sale if your possibly interested in them. Message me and i can get you in contact with him. Good luck with the build man. With little to no support on these cars makes em a real challenge.


          untitled (11 of 18) by lawrx, on Flickr
          IG @gt3_brz

          My Mustang Build
          http://www.stanceworks.com/forums/sh...=1#post1552949

          My BRZ Build
          http://www.stanceworks.com/forums/sh...ad.php?t=86482

          My F100 Build
          http://www.stanceworks.com/forums/sh...ad.php?t=97329

          Comment

          Working...
          X