dope audi bruh: a love built on hatred

[ihate0sc]

if the rears were lowered more, it'd be perfect. but nice build so far

[storey618]

found dunlop direzza star specs in 225/40-18 last night on craigslist for $200. they are basically brand new, guy said he used them for one track event in 2013 and then put them in his basement. DEAL OF THE YEAR!

i dropped off the wheels and tires this morning at the tire shop, my buddy is currently picking them up and bringing them to me. the hub rings i ordered were wrong so i cant mount them but i will be painting them this week and have the rings to mount them by monday or tuesday! pics to come!

[storey618]

put the skid plate on the car today, took half of the dirt on nemos driveway when i left lol right now im currently trying to get my brother to go get me tires i just found on craigslist so i can finally put these new wheels on!!!

[storey618]

So I used to have a 1.8T B6 as well that was slammed on Bilstein PSS9's. My car was at the same height in the front and maybe a quarter inch lower in the rear. I got alignment just fine. Maybe you should go to some other shop and try it out. Worst case scenario if you raise the front half and inch, it should solve the problem. Either way the toe should align within spec.

i never posted the new print out. i ended up going to another belle tire that was also local, met a super cool guy there. they put my car on the rack and found my tie rods were bad, so i changed them. next time i went back they got it all done for me! camber is still the same (front out, back in) and the rear toe is slightly out because "it would throw out the total toe" it drives like a completely different car now!

here is the new printout, top old, bottom new



also i pulled this thing off this morning.its the support for the original plastic belly pan i wont be putting back on because skid plate. last week i had my dad in the car. its his first time in a low car and i lined up the center off the car with a dead squirrel thinking i wouldnt hit it because really im not that crazy low...but we smacked it lol my dad was like "well thats a first, never hit something with the center of a vehicle before" later that week i ran over a dead raccoon. what really killed it though was when i pulled out of my buddies driveway last night which has a center that is about 4" higher than where your wheels roll and it tore it so that it was dragging unless you gunned it and lifted the front end a bit lol sounded like my wheel was locked up!

[storey618]

im so in love with these pictures

[storey618]

still havent done anything to the car. i did take it to its first meet today though, as well as took my first rollers! i think its pretty good

[jalenda9]

Ayye I work at belle tire. That can't tell me shit about alignments on a lowered car. That's the only reason is cool to work there I do them myself and for freeeee lol

[storey618]

today was a good day! finally did my tie rods and wednesday ill be getting my alignment. also picked up some wheels from a buddy. have hubcentric rings on the way, then i need tires and balance. only pic i have is of them still on his car

they are elbrus i02, nothing to special but they are 18x8 and were only $150!

[storey618]

me and my boy nemo out having some fun last night.




right click and open in new tab. or just check out my instagram!

[storey618]

so i attempted going to another belletire that i had heard much better things about. they put it on the lift and then told me my tie rods are bad. so once again i placed an ecs order. this time meyle heavy duty outer tie rod ends. should be here soon. this weekend i may be able to bust out a bunch of the stuff i have to do. we will see! stay tuned ill actually have something mildly cool sometime

[storey618]

so heres a pic of the egr deleted and a few unnecessary vacuum lines. i have a new valve cover, just waiting to paint or powder it




and here is my current dillema. my toes all fucked up and making the car bounce like a boat when i drive. went to a local belle tire this morning and they told me "there isnt enough threads on the tie rod to adjust the toe" which from the internet i have learned is absolute shit. hopefully monday i can make it in somewhere else to get it sorted. if not i may just attempt it myself

[storey618]

sai, and egr are off, egr block off plate is on. waiting for time to cut tabs off intercooler. i got my skid plate yesterday from ecs so once everythings done i can put that on! here it is in all of its potato picture glory

[storey618]

squad at work...just because we have to work, not because we are doing cool car things.



egr block off plate came in yesterday, along with my wipers. then today my skidplate came in. i have to pull the sai pump, egr, some vacuum lines, then cut the two tabs off the bottom of the intercooler...then i can put all my stuff including bumper back on

[storey618]

just got my first compliment from a guy idk at work so that was pretty dope. currently awaiting sai block off plate to delete the sai pump and egr, new wiper blades (what an update!) as well as my ecs skidplate to protect the oil pan that is so stupidly placed. should have pictures in the mean time!

[storey618]

This is going places. Can't wait for updates, my B6 is mid build as well!

Looks way better without the dip, so much cleaner. Keep it up

Even as it is now. It looks so sick.

I like disss

Get that tape of your headlights please
Much better without the dip tho

thanks guys! i have more stuff to come, including removing the plastidip from the headlights, i would like to get it vinyled in body color on the headlights.

looks 100% with the grey wheels

also cat approved suspension ftw

thanks dude, all my parts must be cat approved, i have a picture of him sitting on my intercooler piping box too. hes so damn curious everytime i bring a box inside lol