Ok that is absolutely tits man. I'm a HUGE fan of that finish. Keep it up!
Announcement
Collapse
No announcement yet.
'00 FRC Hardtop - moar LS/Murica/long distance high speed cruising
Collapse
X
-
Originally posted by Stupid KidI need the weed in advance i can't ride my bmx across the ocean unless im high
-
Removed the rear trunklid emblem, it really cleaned up the look. Car got half detailed, I will finish the paint correction on my own.
_DSC4940 by Norbert Ogiba, on Flickr
_DSC4941 by Norbert Ogiba, on Flickr
More Goo Gone,
_DSC4943 by Norbert Ogiba, on Flickr
Magic 3M eraser wheel works wonders yet again, but this will have to be polished out
_DSC4944 by Norbert Ogiba, on Flickr
Compound
_DSC4945 by Norbert Ogiba, on Flickr
After compound, there was still a raised ridge in the paint, can't catch it with a fingernail, but visible if you look hard for it in the right light.
_DSC4946 by Norbert Ogiba, on Flickr
After polish it is invisible from more than 3 inches away
_DSC4947 by Norbert Ogiba, on Flickr
_DSC4948 by Norbert Ogiba, on Flickr
Dug out my old valve spring tool so I can get ready for the LS6 install later this week, it got bent during the install of the old big duals on the BMW 6.0. I'm going to weld up some gussets on it to stiffen it, should hold up better.
_DSC4951 by Norbert Ogiba, on Flickr
Piecing together my cutout stuff, I will tack them all in place and have a shop finish TIG them together for me. V-Band for serviceability
_DSC4952 by Norbert Ogiba, on Flickr
_DSC4953 by Norbert Ogiba, on Flickr
_DSC4954 by Norbert Ogiba, on Flickr
I will need to put some kind of turn down together for the outlet of the valve, possibly wrap the leaf spring in heat resistant insulation to prevent melting it.
More to come later this week, gonna mock up the cutouts, install valvesprings, LS6 intake, paint the airbridge wrinkle red, delete AIR system, etc
Comment
-
Originally posted by MommysLittleMonster View PostWhere on earth did you get those vacuum-actuated cutouts? I need a few of those for scientific reasons.-Christian.
'91 318iS AW2/blk slow garage queen/build...
'02 ///M3 carbonschwartz 6MT daily beast
'37 Chevy pickup-garagequeen...
Comment
-
It's sitting next to a pile of empty beer bottles in the garage. Will install and update this weekend. I need to buy more beer on the way home.
Comment
-
so some ups and downs
got the fishmouths mocked up on the midpipes, traced out the insides, removed the pipes from the car. drove around the block with no pipes, wow it's loud, should be fun. also tacked together fishmouths to v-bands, v-bands to valves. I forgot to order turndowns so I don't melt anything, got a 180* mandrel bend on the way from summit, will be here in a couple days.
_DSC4955 by Norbert Ogiba, on Flickr
_DSC4957 by Norbert Ogiba, on Flickr
_DSC4958 by Norbert Ogiba, on Flickr
clamps that come with the longtubes suck, leaked badly. will pick up some longer bad clamps, have had good luck with those in the past
_DSC4962 by Norbert Ogiba, on Flickr
and the not so good. tires will need to be replaced this year. time to accelerate my wheel/tire plans
_DSC4963 by Norbert Ogiba, on Flickr
most urgent is the front fiberglass leaf spring, this thing had a very fine hairline crack lengthwise when i first bought the car and got it on the lift, but this big crack is a new development. will either pick up another Z51 spring or throw in a Z06 unit
_DSC4966 by Norbert Ogiba, on Flickr
_DSC4967 by Norbert Ogiba, on Flickr
Comment
-
my buddy is TIG'ing everything up for me and sent me some pics
image by Norbert Ogiba, on Flickr
image by Norbert Ogiba, on Flickr
image by Norbert Ogiba, on Flickr
image by Norbert Ogiba, on Flickr
Coworker bought an '01 Coupe with a 6 speed, great condition, 60K
image by Norbert Ogiba, on Flickr
then, this
image by Norbert Ogiba, on Flickr
which works out fine because i'm gonna tear it down this week for the valve springs and intake, install exhaust, etc.
Comment
-
2009 Outback XT. Rare turbo 5 speed model. Stock other than a modified airbox for sounds. Probably going to sell it this year and get a truck.
IMG_20140927_214555_872 by Norbert Ogiba, on Flickr
IMG_20140927_190730_161 by Norbert Ogiba, on Flickr
IMG_20141114_191827_255 by Norbert Ogiba, on Flickr
it does good skids
IMG_20141231_161938_078 by Norbert Ogiba, on Flickr
IMG_20141231_161906_870 by Norbert Ogiba, on Flickr
Comment
-
started working on stuff
_DSC4970 by Norbert Ogiba, on Flickr
_DSC4971 by Norbert Ogiba, on Flickr
_DSC4972 by Norbert Ogiba, on Flickr
_DSC4973 by Norbert Ogiba, on Flickr
Got all the crap transferred to the new manifold, not bad for a couple hours of work. Need to mess with the steam lines next
Comment
-
wife working late tonight and going to have a few drinks with friends afterwards. which means i'm grabbing a 6 pack of PBR pounders and putting in some quality time tonight in the man cave. hoping to get the rear sway bar out of the way, exhaust all buttoned up, and LS6 intake clearanced for the LS1 quad steam lines
Comment
-
My face exactly when I heard " 6 pack of PBR pounders"
Originally posted by Stupid KidI need the weed in advance i can't ride my bmx across the ocean unless im high
Comment
Comment