Cougar House Garage Project Sacrilege Ford Super Duty

[CougarHouseGarage]

These came in this morning side marker and running light I got the LED's from superbrightleds.com


Heres the harness that runs to the back of the truck fuel tank sending unit, tail lights and trailer lights

[CougarHouseGarage]

Old 5.9 dip stick tub

New one installed

[evoDRichie]

$$money$$

[CougarHouseGarage]

you betcha dog

[CougarHouseGarage]

Next up we did the 2008 5R110 large trans filter and matching pan upgrade were going to be pulling a 24' Edge race car trailer for the drift cars with it now


I'm going to build it a trans skied plate

Earl's 8-AN weld fittings to be TIG welded to the trans cooler

Weld fittings TIG welded on and the trans cooler reinstalled on the back of the intercooler




Miked up perfect

[CougarHouseGarage]

Ordered this through Amazone Max Tow by Glow Sport gauges to monitor the tank presser in the cab


I'm going to install it were the 4WD switch went

[CougarHouseGarage]

I'm going to use this liquid filled gauge I got though Amazon to monitor tank presser on the tank itself

[CougarHouseGarage]

I received these through Amazon to connected the fuse box's then to run back to the battery

Passenger side cab fuse box


Driver side to engine compartment fuse box

[CougarHouseGarage]

Soldered in the LED drivers

Don't need this

I think they look great to tell the projector retrofit

[drifte]

That light beam is intense, you guys arent messing around out there. Incredible project.

[TruTaing]

Is this going to be at the leavenworth drive? :x

[CougarHouseGarage]

That light beam is intense, you guys arent messing around out there. Incredible project.

Thanks man your cars really nice as well

Is this going to be at the leavenworth drive? :x

Were going to try to make that event

[CougarHouseGarage]

Made the shelf for the fuse panels to sit on today


Mount the Accuair ECU on the end

Made a hole for the bussman fuse,and relay box to mount and the 70amp relay will go here

70amp relay mounted

Redid the compressors grounds

I made grounds with male and female plugs so I could plug them in when I'm installing the self.
These females will bolt down for the ground males to plug in to.

I like using white for ground

[CougarHouseGarage]

Lets connect these batteries



Boom

Power side

Getting the self installed

Installed the maga fuse block

I ran the 10amp 12+ Accuair fuse through the bussman fuse box



Got my last delcity order organized

Stinger 250 foot spool of 4 gauge wire

[lamsv]

Clean wiring like that makes me happy.