Cougar House Garage Project Sacrilege Ford Super Duty

[Brainfood]

This is one of the most unreal builds. Makes me wanna sell all my BMW shit and get back into trucks haha

[TruTaing]

Oh. wtf. I just clicked on the link to your website. You're in WASHINGTON. Must see this when its completed!

[CougarHouseGarage]

Hey dudes we got the VU-2 valves mounted and started making the lines there 316 SS 3/8 tubing

[CougarHouseGarage]

This morning we received one of our Odyssey PC2150 batteries, two group 34 batteries would probably put out enough for the cummins but were building this mouther fu**er for DOOMSDAY





Driver air bag to valve line ran






We cut open the upper bag mount to excess the air line fitting it's going to get cleaned it up


You can see how we ran the air line


Picked the sunroof surround trim





All so picked up the 2005 cummins 5.9 crank position sensor that I need to make the tech work

[CougarHouseGarage]

I pulled a plug out of the head for this adaptor for the ford 6.4 coolant temperature sensor



I started the turbo coolant return line I'm using Earle's Pro-light 350 hose an Ano-Tuff 8-AN fittings

[CougarHouseGarage]

Went down to napa and picked up a 2006 super duty 6.0 starter

Tight


Picked up the 6.4 diesel oil presser, coolant temp and MAP sensors


I got to come up with something for the oil presser sensor


And started this endeavor



COUGAR HOUSE!

[GTOguy]

this build is so incredible. I can't wait to see where it goes from here <3

[CougarHouseGarage]

Bent up the front bag lines

The tire will never touch the line






Here's a line that connects to the front line and go's to the bulkhead fitting in the tool box


Heater core in An-fitting madness

1/2 NPT




I ordered some Vibrant performance silicone hose from Summit for the turbo oil drain

[Nuts]

One hell of a build bud. Got to hand it to you guys. Amazing work.

[Lukey]

damn so much detail!! lovin it

[CougarHouseGarage]

One hell of a build bud. Got to hand it to you guys. Amazing work.

damn so much detail!! lovin it

Thanks guys got to keep up my resolve

[CougarHouseGarage]

Received more AN- fittings














I ordered this fuse block with ground from Delcity for the accessories in the tool box



This one for the 90AMP compressor relay

[ramong24]

Wouldn't airing up/down possibly bend/break those hardlines? I thought you needed soft lines to the bag, then hardlines anywhere after

[Red_Arrowheads]

Wouldn't airing up/down possibly bend/break those hardlines?

Why would it bend/break them? The top mount of the bag doesn't move with the suspension.

[CougarHouseGarage]

Thats the lowest the arm will go lol


Turbo drain

2001 chevrolet rack an pinion