Wide and Low Toyota Corolla KE20 RWD

[Rolla75]

Okay, welded up the pitman arm just for moving the car..

started making the body clear the tires..

welded up both rear arches

ditching the 1,2 and 4 spped for a 1,6 5 speed that im building a turbo setup for
bought this lot for a few bucks.. New intercooler, new dump, new boostcontroller , new boost guage and a used Renault 5 Turbo carb and a adapter plate for the carb

making room for the intercooler


had a spare block and head that i stuck in there with not matching motor mounts and a T25 from a Ca18 that im going to stick on it, going to be topmounted



going to pick up an engine on saturday

[meech]

this is gonna be so cool man, never seen one before. In for boost and wide wheels

[cruuz]

I have sooooooo much love for old toyotas. Sub'd

[RowdyRoddinRyan]

*Heart eyes* *Heart eyes*

[Rolla75]

new engine for the Rallyrolla, this has high compression and 2 carbs so no turbo for this, taking the engine out of the RallyRolla and chucking in this!

picked up a doubble working vacume clock for the ignition, pulls on vacume and pushes on pressure

struts finished

alright height without flares

made some room for the tire to turn



needs more low in the rear and i need to get my 12 inch wide wheels back soon ( widened the lip by 3 inches)


making quarter bumpers

need some more work

thinking of cuttin out the so its one large hole where the bumper used to sit

and here i did it

painted the IC, the old tyota logo inside the rising sun

the back is sooo high, liked how the front end turned out

[TWM Performance]

Such an awesome build, love it!

- Renato

[Rolla75]

the tims is going to be great!
16x12

got my sr20 manifold

[Jonnys_Stanceventures]

Wow! Really amazing job with this! Loved that detail you put on the intercooler! Can't wait to see what's next!

[Rolla75]

whats next is me trying to weld aluminium for the first time! asked a local workshop i they could do it, they said i could lend their welder and try myself, its a MIG so im excited!
made up a jig for welding them

[v8_ranch]

whats next is me trying to weld aluminium for the first time! asked a local workshop i they could do it, they said i could lend their welder and try myself, its a MIG so im excited!
made up a jig for welding them

This is some great work. Did the car every get finished. I know this is an old thread, but hoping to see more of this car

[JuusoEt]

Thumbs on this, was that aluminium welding hard for the wheels? Did these ever finished, more updates please.