Tweet
Hello guys, my name is Vincent Ngo, and I thought I'd share my little 335i build with you guys! Its nothing crazy, but its definitely a work in progress!!
2008 335i 6 Speed Manual
Alpine White/Coral Red
CURRENT MOD LIST
Blacked out Kidney Grills
40W Angel Eyes by CREE
ZHP Shift Knob
Dynavin N6 Multimedia head unit
Universal Polyurethane Side Splitters
Front Lip
Rear M-Tech Bumper
BC Racing Coilovers
Megan Racing Camber Arms
Work Equip 05 fully built by infinitwheels in El Monte.
Step lipped from 18'' faces to 19s, high polished lips and chrome faces.
19x9.5 +15 19x11 +23
225/35/19 front, 265/30/19 rear
Procede Vishnu v5
A little background story to why and how I got this car
So before I drove this car, I actually had a 2006 Lexus GS300. It was fully bagged and was one of my favorite builds, but I sadly got t-boned and the car was a total loss. Before the GS I had an STi, so I knew it was a sign to go back to a quicker car, but I didn't want to give up the luxury I had with the GS either, so I thought the 335i would be the perfect balance between the two!
heres a pic of the GS
IMG_4151 by VincentNgoPhotography, on Flickr
So it all started with this. Bought the car back in November with 68k miles. It had lowering springs and replica BBS LMs.
IMG_4737 by VincentNgoPhotography, on Flickr
The same month I picked up wheels, coilovers, and camber arms
Wheels were Weds Kranze Bazreia. 18x10 +14 18x10.5 +20
IMG_4786 by VincentNgoPhotography, on Flickr
and here was how it turned out
IMG_4930 by VincentNgoPhotography, on Flickr
IMG_5905 by VincentNgoPhotography, on Flickr
the car sat a little high in the rear and needed just a tad bit more camber, so I went ahead and installed a camber kit and lowered it a little more. Also threw on some side splitters Heres a few shots of the setup.
DSC00374 by VincentNgoPhotography, on Flickr
IMG_6025-2 by VincentNgoPhotography, on Flickr
DSC00988 by VincentNgoPhotography, on Flickr
then I also installed my mtech rear bumper (new diffuser coming soon hopefully!) and also got my new vanity plates as well
DSC00991 by VincentNgoPhotography, on Flickr
A picture with me and my friends tiffany wrapped E90 M3 (raikou wasn't present sadly missing..)
IMG_6047 by VincentNgoPhotography, on Flickr
Went ahead and installed my Dynavin N6. Heres an interior shot!
IMG_6423 by VincentNgoPhotography, on Flickr
I finally got over the set of weds on my car, I wanted to go with something that flowed better and were 19's, so I got the equips! I only got the Bazreias cause they use to be one of my favorite wheels and I got them for a STEAL!
Heres some pics of the setup.
IMG_6428 by VincentNgoPhotography, on Flickr
IMG_6427 by VincentNgoPhotography, on Flickr
DSC01096 by VincentNgoPhotography, on Flickr
And just for fun, heres a pic of the equips before I raised the car...although it looked cool I don't think I was able to drive for more than 5 seconds before hearing the rear rub like crazy
IMG_6387 by VincentNgoPhotography, on Flickr
and thats how she sits as of today. I will periodically update this build thread as I get new goodies coming in. Stay tuned!
2008 335i 6 Speed Manual
Alpine White/Coral Red
CURRENT MOD LIST
Blacked out Kidney Grills
40W Angel Eyes by CREE
ZHP Shift Knob
Dynavin N6 Multimedia head unit
Universal Polyurethane Side Splitters
Front Lip
Rear M-Tech Bumper
BC Racing Coilovers
Megan Racing Camber Arms
Work Equip 05 fully built by infinitwheels in El Monte.
Step lipped from 18'' faces to 19s, high polished lips and chrome faces.
19x9.5 +15 19x11 +23
225/35/19 front, 265/30/19 rear
Procede Vishnu v5
A little background story to why and how I got this car
So before I drove this car, I actually had a 2006 Lexus GS300. It was fully bagged and was one of my favorite builds, but I sadly got t-boned and the car was a total loss. Before the GS I had an STi, so I knew it was a sign to go back to a quicker car, but I didn't want to give up the luxury I had with the GS either, so I thought the 335i would be the perfect balance between the two!
heres a pic of the GS
IMG_4151 by VincentNgoPhotography, on FlickrSo it all started with this. Bought the car back in November with 68k miles. It had lowering springs and replica BBS LMs.
IMG_4737 by VincentNgoPhotography, on FlickrThe same month I picked up wheels, coilovers, and camber arms
Wheels were Weds Kranze Bazreia. 18x10 +14 18x10.5 +20
IMG_4786 by VincentNgoPhotography, on Flickrand here was how it turned out
IMG_4930 by VincentNgoPhotography, on FlickrIMG_5905 by VincentNgoPhotography, on Flickrthe car sat a little high in the rear and needed just a tad bit more camber, so I went ahead and installed a camber kit and lowered it a little more. Also threw on some side splitters Heres a few shots of the setup.
DSC00374 by VincentNgoPhotography, on FlickrIMG_6025-2 by VincentNgoPhotography, on FlickrDSC00988 by VincentNgoPhotography, on Flickrthen I also installed my mtech rear bumper (new diffuser coming soon hopefully!) and also got my new vanity plates as well
DSC00991 by VincentNgoPhotography, on FlickrA picture with me and my friends tiffany wrapped E90 M3 (raikou wasn't present sadly missing..)
IMG_6047 by VincentNgoPhotography, on FlickrWent ahead and installed my Dynavin N6. Heres an interior shot!
IMG_6423 by VincentNgoPhotography, on FlickrI finally got over the set of weds on my car, I wanted to go with something that flowed better and were 19's, so I got the equips! I only got the Bazreias cause they use to be one of my favorite wheels and I got them for a STEAL!
Heres some pics of the setup.
IMG_6428 by VincentNgoPhotography, on FlickrIMG_6427 by VincentNgoPhotography, on FlickrDSC01096 by VincentNgoPhotography, on FlickrAnd just for fun, heres a pic of the equips before I raised the car...although it looked cool I don't think I was able to drive for more than 5 seconds before hearing the rear rub like crazy
IMG_6387 by VincentNgoPhotography, on Flickrand thats how she sits as of today. I will periodically update this build thread as I get new goodies coming in. Stay tuned!
Comment