1 dollar Grain of Rice

[BrokeBallin18]

Also did a cruise delete along with that big bulky airbox

[storey618]

looking good homie...now drop it!

[BrokeBallin18]

A List of the things ill be doing in the mean time,
Front powerstop drilled and slotted rotors and calipers, possibly ebc or hawks,
and the drum kits in the rears because those are going.
Transmission wise i need an iacv and manual starter and throttle body along with the clutch/ slave cylinder and hard-lines. I may just pick up anoth s40 because i cant get the stupid transfer casing apart so i can check my gears, synchros and bearings. mtf, Manual throttle cable is what ive heard(??) and a exedy stage 1 clutch and flywheels.
Then ive been tossing around a new hood with aerocatch flat bonnet hoodpins if you guys know what those are and i was gonna throw some hood spacers on it to give it a little grunt LOL

[BrokeBallin18]

looking good homie...now drop it!

GOALS

Im Probobly gonna go with the skunk 2s pros and there coil over sleeves as far as lowering it goes, im on the hunt for some cheap "stockish" looking 14-15 inch wheels i can slap on because im sick of steelies and i dont want to buy the real rims i want just yet because i have a plan for those lol its a secret though!

[SnazzyQ]

Lower it pls...

Also that picture of the front end when it is all wet is the greatest picture ive ever seen

[BrokeBallin18]

Lower it pls...

Also that picture of the front end when it is all wet is the greatest picture ive ever seen

[baggedb16sentra]

looks promising, just my opinion id stay focus on the swap and not invest in the hood, hood pins and hood spacers.

[storey618]

looks promising, just my opinion id stay focus on the swap and not invest in the hood, hood pins and hood spacers.

X2

[jalenda9]

X3. Haha jk I jumped on the wagon lol

[BrokeBallin18]

I GUESS ILL UDATE YEE,\
so ive been really focused on the transmisson,

My Twin gave me his old nrg soooo
Clutch/slave cylinder, (i think i need more line)


Been Trying to help this guy get the da9 moving.


ricers

[BrokeBallin18]

sorry for my useless post but this is where im at,



Finally got the transfercase seperaterd, and now i can buy the gear puller and do the mild rebuild with carbon lined synchros,
finally found the TB with the iacv and map that work so i scooped that up and a rear lower trans mount. when its all here ill take pictures of all my garbage. My goals are to have it done with in the next month and a half. Im also about to do my brakes all around, not that anyone cares but aye. After that im going to look into all my suspension components and see what i should upgrade. id like to say my axles are starting to click from the bearings being worn inside the boot. I havens gotten to look down under because ive been working a pure 6 days a week to pay my rent and such. Sorry for some of my shotty iphone pictures.

[BrokeBallin18]

I had Read Your story...pics are Good..intelligent person.

Thanks buddy! I'll take a picture of my parts when I get home with my actual camera so you guys can see what all goes into the conversion, I would of been done but I haven't had the time and money to invest every single week like I always want to. Plus I have to buy all my own tools since my brother moved out, along with a cherry picker.