Back To The Start: E28 Shenaigans

[12vsex]

I vote champagne faces on the rs's. But im biased. Looking good dude.

Honestly seriously considering it .

I remember that 5.0 from Leavenworth. Best sounding modern mustang ever...

He will be back this year slammed with a few more goodies for sure ! its the best sounding one I've ever heard imho. Sounds even better when it fly's past you over triple digits too lol

[Tony Soprano]

like this?

https://www.youtube.com/watch?v=3WhtZUQSTeA

[12vsex]

Its been a while. I haven't done too much to the car , both because I've been a lazy ass and I've been hoarding parts. Kind of want to get all the parts on the car at the same time .
Finally got an exhaust made. Here's a shitty picture, ill get another soon . Happy with it, going for sort of a Dtm style .


Anyways, here's a little bit of a sneak peak of what's been acquired so far.

Finished on breaking down the wheels , broke down my buddies Epsilons too . Sent them out to spintech because he's the only guy ill trust to do the correct job.



Patrick sent me these photos about a week ago .


And just yesterday , he sent me a sneak peak of my buddies wheels . We chose to do the same color . 3 stage PC in metallic silver. Guess I should get to work on my lips !


So In the mean time , I found some sport seats , and purchased a momo indy because I now have an obsession with steering wheels. Trying to find a momo center too btw.



So for ever I've been looking for an e28 Heckblende. Nobody has one and nobody runs them so I have had a hard time finding one. So I made connections with some guys in the U.K and bought two of them . One for me and one for a buddy with a full euro grey market 528. Excited to be the only known two guys in the united states with them. I started stripping mine and I'm going to get custom bmw letters that match the original design.



Also ordered another skid plate. Hopefully this one doesn't bend so easily. The Oem one I waited 2 months to get from Germany lasted about a week. Damn thing hung down too low and bent a bit from impact with a man hole cover. bent it back and sent it to a guy in the Midwest . Hopefully it suits him well .


Also Found a great Deal ( IMHO ) on ebay. 400 shipped for a set of Euros that have been polished / PC is a great deal to me . Still waiting for these to show up . Currently in transit from Poland



So while I've been waiting I finished the Epsilons . Sold them to a cool guy on the east coast for a deal . He's putting them on a Volvo Amazon 122. Super excited to see them go to a clean car. Not sure if he's on the site. If I get pictures I'll put them up for sure .


Also Picked these up for a new project I have . I will be starting a build for that . more a mild build since its a clean car that doesn't need a whole lot. Its a classic Mercedes S class, Full grey market


So next time I update the thread I hope to actually have pictures of parts INSTALLED and not just sitting on the floor looking pretty, I apologize for the lack of ''work", please hang in there , It will all be worth it!
Still waiting for My coilovers , I'm having broadway static build me a set with 1,000lb rates out back and 900lb up front . Planning on going low , super low. I want to be one of the few guys that run 16" wheels , and I want to pull it off well .
That brings me to my next question ... Tire size. Part of me wants to play it safe and go with 205/45's on my Rs's . 16x10 will give it a nice look . But Part of me wants to go with 195/50's for a taller tire with pretty much the same similar stretch . with the 195/50's ill be able to tuck tire and still have a usable subframe to ground height.
Any thoughts are appreciated .

[Shawnc16]

Who makes that skid plate? I need some one (Michigan roads) before it goes any lower

[12vsex]

Who makes that skid plate? I need some one (Michigan roads) before it goes any lower

RED46 http://www.red46.net/
the guy builds epic plates man . its like 40lbs of solid stainless steel . High quality and supposedly super super strong. Ill be putting mine on this weekend so I will add some pictures of that .

[Shawnc16]

Nice! Thanks. That's a pretty good price too.

[kneums]

This is cute. Me likey.

[KrautnotRice]

Very nice progress. Following along.
It's good to know there's a decent amount of e28 love here on s/w and not just "purists" / snobs hehe

[BrandonMcKiernan]

16s are where its at. id run an even smaller tire. I have 195/45s on my 16s and still have rubbing issues on my driver side. even pulled my fender in a bunch already :/

[12vsex]

Very nice progress. Following along.
It's good to know there's a decent amount of e28 love here on s/w and not just "purists" / snobs hehe

haha thanks bud , yeah if you want purists then mye28 is the place to be. cool forum just nobody who thinks outside the typical style 5's and lowering springs haha.

This is cute. Me likey.

ummm thanks ?

16s are where its at. id run an even smaller tire. I have 195/45s on my 16s and still have rubbing issues on my driver side. even pulled my fender in a bunch already :/

I had no clue you were on 16's for some reason I thought the wheels you were on were 17's . I'm even more impressed . Whats your offsets ? Mine will be -4 on a 10" . I guess that's why I'm thinking 195's and max the camber plates out ?

[12vsex]

Patrick Sent me a picture of my Rs's finally .
Hard to tell honestly but I'm not hard to please . Looks good to me !


And here is the Skit plate installed. If your low and have an e28, buy one. Lost 0 ground clearance . Best plate design by far . Keep in mind , I'm no where as low as its going to be, just sitting on lame cut springs and 17's . Still gives me tons of room to go lower

[SnazzyQ]

Dang flabbit stop making me want to buy an e28.

[BrandonMcKiernan]

I had no clue you were on 16's for some reason I thought the wheels you were on were 17's . I'm even more impressed . Whats your offsets ? Mine will be -4 on a 10" . I guess that's why I'm thinking 195's and max the camber plates out ?

Yeah man! haha. my fronts are at -10 with a 8.5 and rears are at -1 with a 9.5. Thats just with rolled fenders. The rear wheel hits the fender but only on gnarly stuff or with a full car.
You should be able to fit that easy with a little pull.

[12vsex]

Dang flabbit stop making me want to buy an e28.

or you can just go buy one and be happer than with a Honda

Yeah man! haha. my fronts are at -10 with a 8.5 and rears are at -1 with a 9.5. Thats just with rolled fenders. The rear wheel hits the fender but only on gnarly stuff or with a full car.
You should be able to fit that easy with a little pull.

Ok gotcha thanks !
I noticed your on Federal 595's aren't you ? Just asking cause I know they run big , maybe running a different brand up front will help with the rubbing ? Then again , rubbing is all part of the nature of slamming our cars haha

[philohlean]

SO jealous of your wheel collection.... You sir, have fantastic taste. Did you ever sell those Riken's? Sorry if I missed that update haha. Either way, pumped as always to see progress in this thread man, keep it up!