Something a little different!

[mgpdoc]

Love this

[projecthoarder]

Awesome build, I personally like the springer front forks. As far as the light it's probably internally grounded.

[scotto]

Springer fork looks better, more of the custom look. If you have troubles with the pedals, then move the bottom bracket tube up along the lower tube more towards the front. This is also on my near future plans, always wanted one but couldn't get myself to cut my 68 Schwinn, so it was sold for a nice profit.

[CBURKE]

Springer fork looks better, more of the custom look. If you have troubles with the pedals, then move the bottom bracket tube up along the lower tube more towards the front. This is also on my near future plans, always wanted one but couldn't get myself to cut my 68 Schwinn, so it was sold for a nice profit.

That's why I cut up a Huffy! lol
After this one is done I'll be trying my fab skills at building my own frame!

[CBURKE]

Awesome build, I personally like the springer front forks. As far as the light it's probably internally grounded.

I think so too. If anything it'll look cool lol.
Waiting on the headlight.

[CBURKE]

Seat post is done. I should be getting things done a little faster now that I got a bunch of customers stuff out of the way.
1907873_317504675095102_4254460890012035459_n by cburke.industries, on Flickr

10411800_317504588428444_2290064308077057021_n by cburke.industries, on Flickr

10523943_317504598428443_8091255962729595040_n by cburke.industries, on Flickr

10710787_317504578428445_5338622856431801937_n by cburke.industries, on Flickr

1620411_317504538428449_650046348099628315_n by cburke.industries, on Flickr

Time to order my seat!

[CBURKE]

Headlight is in!
20141027_173810 by cburke.industries, on Flickr

Cut my fender, but it's not done.
20141027_175904 by cburke.industries, on Flickr

Getting ready to strip it all back apart so I can strip the old paint.
20141027_175916 by cburke.industries, on Flickr

[DonkeyPunch]

Taillight came in. Will need to build a bracket to hold it. Not sure how I'm going to get this light to work. I only has one wire....
ZOMBIEHEARSEHEADBADGE by cburke.industries, on Flickr

It should be self grounding... the wire should go to your power source

[CBURKE]

I'm not gonna mess with the crank being only a 1/2 inch from the ground so I cut the lower bar and moved it down. I don't have a pipe bender so I used pie cuts to bend the bottom half and slid a small but thicker tube inside.
20141028_180155 by cburke.industries, on Flickr

20141028_185758 by cburke.industries, on Flickr

20141028_190513 by cburke.industries, on Flickr

20141028_192705 by cburke.industries, on Flickr

20141028_192724 by cburke.industries, on Flickr

Now I need to finish grinding down the welds, had a little putty and I have a smaller bar I want to run across the middle.
All for now!

[CBURKE]

Doing some test panels to see how I want to lay the "Fotina"

I think I'm going to go with spraying both colors and wet sanding until it comes through, like this:
20141102_124323 by cburke.industries, on Flickr

This is just sprayed on
20141102_124329 by cburke.industries, on Flickr

Here is a v-cover I did to hang in my garage.
20141103_083305 by cburke.industries, on Flickr

Tonight I will try and get the new crank holder (whatever it's called) moved to the front and finish grinding down the welds.

[crxmarc]

very nice work!

[CBURKE]

Thank you!

Got some real work done last night! So stoked how it's turning out!!!
Just need to finish up the middle plate for the logo, then paint time. Can't wait!

20141103_191743 by cburke.industries, on Flickr

20141103_191804 by cburke.industries, on Flickr

20141103_200943 by cburke.industries, on Flickr

20141103_201013 by cburke.industries, on Flickr

20141103_201026 by cburke.industries, on Flickr

20141103_201853 by cburke.industries, on Flickr

20141103_202501 by cburke.industries, on Flickr

20141103_202515 by cburke.industries, on Flickr

20141103_205232 by cburke.industries, on Flickr

20141103_205934 by cburke.industries, on Flickr

20141103_212102 by cburke.industries, on Flickr

20141103_212839 by cburke.industries, on Flickr

20141103_213500 by cburke.industries, on Flickr

20141103_220033 by cburke.industries, on Flickr

20141103_220043 by cburke.industries, on Flickr

20141103_220729 by cburke.industries, on Flickr

20141103_222530 by cburke.industries, on Flickr

20141103_223003 by cburke.industries, on Flickr

20141103_223353 by cburke.industries, on Flickr

20141103_223403 by cburke.industries, on Flickr

20141103_223414 by cburke.industries, on Flickr

20141103_223606 by cburke.industries, on Flickr

20141103_223812 by cburke.industries, on Flickr

20141103_223915 by cburke.industries, on Flickr

That's all for now. For being my first bike build ever, I'm really happy with it!
Thanks for looking!

[CBURKE]

10672385_296918103820426_6946380042056084122_n by cburke.industries, on Flickr

[CBURKE]

Well chain is on and took it for a test ride. Going to take some getting use to, but so far so good! Need to make a little room in the back for the chain, rubs a little.
IMG_20141106_172702 by cburke.industries, on Flickr

Also did some work to a kickstand.
20141106_173055 by cburke.industries, on Flickr

[CBURKE]

Wanted to take some better pictures of it. Busted out the good camera!
Also got the kick stand on and the center plate on.
TIME FOR PAINT!
PB090001 by cburke.industries, on Flickr

PB090004 by cburke.industries, on Flickr

PB090005 by cburke.industries, on Flickr

PB090006 by cburke.industries, on Flickr

PB090007 by cburke.industries, on Flickr

PB090008 by cburke.industries, on Flickr

PB090009 by cburke.industries, on Flickr

PB090010 by cburke.industries, on Flickr

PB090011 by cburke.industries, on Flickr

PB090014 by cburke.industries, on Flickr

PB090015 by cburke.industries, on Flickr

PB090024 by cburke.industries, on Flickr

20141109_191946 by cburke.industries, on Flickr

20141109_193454 by cburke.industries, on Flickr

All for now until I can get some paint on it! Getting closer....