Tweet
This thread is mainly made to assist fellow W202 owners with bagging there car, This would not have been easy if it wasnt for fellow member SD202, I asked him like a million and one questions and he was always there to answer them. Im in no rush to finish my car because i want everything to come out right and eventually be show quality, which will awhile, but im passionate about my car and it is something i will keep forever..I expect to run into problems, but you live and you learn..follow me on ig if you follow this thread, to see videos on some of the things i ran into, and easier response on questions @illest_optics
PS. if you need a photo shoot and are in the PA,NJ,NY area holla at me..
My baby
The package from bagriders... AutopilotV2..
while waiting for the brackets to be made
perfect fit in trunk
running hoses through cable channels inside car
hoses come out underneath right in the front of the sideskirts
hoses zip tied on screws that hold the plastic wheel well covers
The controller upfront
connection mid point in center console
brackets done 4.5 OD fronts 3.5 in tall, REARS 4 in OD 3in tall, plates 6 in OD
Removing and cutting of control arms, Front control arm spring perches must be shaved!
checking and aligning, then plates welded to control arms
painted
rear top spring cups must be notched for free movement of hoses
Elbow swivels from a local company FASTENAL.COM
1/4 PTC TO 1/2 NPT SS-5 BAGS ALL AROUND
poly for the LCA'S
The wheels <3
wheels came back from getting redone
admiring my low...
trunk install finished, just need some final tweaking to even everything out
PS. if you need a photo shoot and are in the PA,NJ,NY area holla at me..
My baby
The package from bagriders... AutopilotV2..
while waiting for the brackets to be made
perfect fit in trunk
running hoses through cable channels inside car
hoses come out underneath right in the front of the sideskirts
hoses zip tied on screws that hold the plastic wheel well covers
The controller upfront
connection mid point in center console
brackets done 4.5 OD fronts 3.5 in tall, REARS 4 in OD 3in tall, plates 6 in OD
Removing and cutting of control arms, Front control arm spring perches must be shaved!
checking and aligning, then plates welded to control arms
painted
rear top spring cups must be notched for free movement of hoses
Elbow swivels from a local company FASTENAL.COM
1/4 PTC TO 1/2 NPT SS-5 BAGS ALL AROUND
poly for the LCA'S
The wheels <3
wheels came back from getting redone
admiring my low...
trunk install finished, just need some final tweaking to even everything out
Comment