1997' Nissan Bluebuebird Altima (u13)

[speakerboy]

Looks good! I would try and cut down on the different colored lights though. You've got clear, smoked, yellow, and clear with black housings. It breaks up the lines on the front. Other than that really minor and petty point, your car is clean. Nice job!

[boostedqr25]

08/01/2015 Update Part 1.

Been a while since I been on here.
Last year's winter whooped my ass.
Broke both side skirts and lost power to
my headlights during the winter season.
An it was way to cold to get anything done

Winter Mode (2014)




As winter slowly started to end, (Now in 2015) I was
finally able to start figuring out why I lost power to my
headlights. Came to find out that my winter wheels & tire
setup were to blame. My 205/60 r15s Winterforce tires
killed my harness lol



After some rewiring & soldering I got power back
an all was good. Weather started to look good so
I decided to go back to beast mode. So I tossed on
my wheels. Re-lowered the Bluebird, did a tune up,
& finally washed & hit it with a detail. That was short
lived two days later on the 1st day of Spring thanks to
an unexpected snow storm lol.





After a few days Spring finally arrived.
I finally Tinted the Windows in 20% Black.
I changed up the front end a bit. Ordered
Euro Clear Glass headlights & removed the
Yellow Tint Film from the foglights. Came out
looking amazing imo. Installed the headlights
& I Hit up the1st Cars & Coffee Steel Stacks
of the year with my wife & the Squad. After
Cars & Coffee we did a quick photoshoot.
These are the results.







Shots with my Wifey at Cars & Coffee Steel Stacks




Was still on the hunt for some skirt. Originally
I wanted to get OEM S.E side skirts but like
everything else for this car it's very rare an hard
to find em. So after looking around for a bit
I found a set that actually were for the Bluebird &
closely resembled the OEM Skirts.







By this time the 2nd Cars & Coffee Steel Stacks was
a few days away so I sanded an painted the skirts, the
Front lip, & Rear Lips. Hit up Cars & Coffee Steel Stacks
a few days later with everything back on.



The Wifey posted up in the Bluebird


An my best friend Cody
loving the Bluebird an detailing it lol


08/01/2015 Part 2 Update Coming Up Shortly

[boostedqr25]

08/01/2015 Update Part 2.

At this point in my update I will take a
quick pause on the Bluebird. People always
ask me why my username is @Boostedqr25.
That is because I own an 03 Nissan Sentra LE-T
which ive boosted an built since 2002. During
the modding of my Bluebird I was also finishing
up my LE-T which needed wheels to be completed
I ordered Avant Garde Wheels model F111's built
In a custom size for it.

This was the outcome. (I will be making a separate
build page for that soon)









Last Teaser till I make a build page for it


After mounting the tires and installing the new wheels
I took it for drive. That drive showed me why I had to
park it. With the 3" Protech Exhaust an the Subframe
being so low on these cars I was dragging everywhere an
put 2 holes in my exhaust. So the next alternative was to
raise it up (which I don't believe in) or go the distance.
So I now have an airlift kit on order to help me with this
problem. So while the LE-T is on my lift waiting for Air,
I decided to do some things in the meantime.
Here we go






Also re-adjusted my camber to -6 degrees all around




On my way to the 3rd Cars & Coffee
Steel Stacks Last weekend.


Favorite Pic from that day


Rollin into the Steel Stacks


So for now that's how she sits. I do want to get
another set of wheels for the Bluebird. Was thinking
brands like Messer Wheels or Rotiforms as the next set
but will see what happens. I wana get the LE-T done
first before I make those moves.

[shippedout]

This is wicked. Leather int swap in the future?

[boostedqr25]

This is wicked. Leather int swap in the future?

Thank you bro. An na am actually pretty much done modding this car. Its just my daily. All I want to do is
get a different set of wheels like Messer Wheels or
some Rotiforms. I wana get my other car done. Then
I'll be happy lol

[jalenda9]

Dude I've never liked the look of sentra 200sx's(at least hear in the states anyway) but man this is so good. It looks clean brotha! And the avant garde's are just beautiful. Props to you boss and I can't wait to see what you do next.

[jalenda9]

I like sentras now though

[boostedqr25]

Dude I've never liked the look of sentra 200sx's(at least hear in the states anyway) but man this is so good. It looks clean brotha! And the avant garde's are just beautiful. Props to you boss and I can't wait to see what you do next.

Haha thanks man. I'll have the build page for my Sentra
up soon. Once my Air Ride get in I'll start the page. What
I have planned out for the Sentra is finish up the Air Ride
& Possibly wrap the whole car something interesting. Also
want to get my Aero Design Race seats in, install my NRG
Steering Wheel, & put in the NRG Harness bar to
complete that. Hopefully that will all be done before the
year is done.

[shippedout]

Thank you bro. An na am actually pretty much done modding this car. Its just my daily. All I want to do is
get a different set of wheels like Messer Wheels or
some Rotiforms. I wana get my other car done. Then
I'll be happy lol

Ahh I see.

More pics of the other Sentra. My buddies building a 3.5 swapped SpecV which were helping him with

[rice4life]

Thank you bro. An na am actually pretty much done modding this car. Its just my daily. All I want to do is
get a different set of wheels like Messer Wheels or
some Rotiforms. I wana get my other car done. Then
I'll be happy lol

Here's how it usually goes. You "finish" one car and are happy with it, then you get bored, and as soon as money comes available, you go get a new project or change something on this car.

I need to stop using so many damn commas.
I hope this isn't finished it's pretty damn cool. I just wished that you would get the jdm badges for it.

[boostedqr25]

Here's how it usually goes. You "finish" one car and are happy with it, then you get bored, and as soon as money comes available, you go get a new project or change something on this car.

I need to stop using so many damn commas.
I hope this isn't finished it's pretty damn cool. I just wished that you would get the jdm badges for it.

lol thanks. I was thinking about retrofitting a Rocket Bunny kit for it an run a wider set of wheels but I don't think that will happen anytime soon. Eventually I'd like to give that idea a shot though.

[Absorbantnut]

Wow just read thru the whole thread. Quite a few transformations took place, and I liked em all! Nice job with the car man, it came out great

[boostedqr25]

Wow just read thru the whole thread. Quite a few transformations took place, and I liked em all! Nice job with the car man, it came out great

Thank you man. She's been through alot this 1st year with her. Once the other cars done I think am gonna step up an do the Rocket Bunny kit. Keep looking at it an thinking how nice it would be to see that done.

[rice4life]

Why do you call it a rocket bunny kit if it's not branded as such and not made or designed by 6666 customs?

It just seems strange, as everyone also call bolt on flared porsche's RWB style and shit, when that style has been around for 30+ years with the style popularized by TBK in the 80's. Same with the "rocket bunny" stuff. A lot of zokusha guys had that exact style going for a long ass time.

No **** intended man, I just don't like how everything widebody it seems is now liberty walk/rocket bunny.

[boostedqr25]

Why do you call it a rocket bunny kit if it's not branded as such and not made or designed by 6666 customs?

It just seems strange, as everyone also call bolt on flared porsche's RWB style and shit, when that style has been around for 30+ years with the style popularized by TBK in the 80's. Same with the "rocket bunny" stuff. A lot of zokusha guys had that exact style going for a long ass time.

No **** intended man, I just don't like how everything widebody it seems is now liberty walk/rocket bunny.

It's all good dude. I don't really care for what it's called or who makes it cause no one makes anything like that for my car. That's what most people call it on the net. I know it's a widebody kit plain an simple. All I wana do is try to find one that I'd have to customize anyway to try an make fit. All that technical stuff can be saved for another thread.