Announcement
Collapse
No announcement yet.
Juiced ls400 vip build.
Collapse
X
-
hydros always seemed so brutal to me (to the car). you're doing a great job, but that last video lol
Leave a comment:
-
Well i got a lot done on the car! fenders are all almost done thanks to jordan with the e3 who gave me a hand with the fenders! My new wheels are in the country so they'll be on soon! I managed to get a few pictures and a video to show the progress so far!


trunk lid is eventually smoothed out!
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/t1/1016575_217295351804020_1079015743_n.jpg[/IMG
[ame="http://www.youtube.com/watch?v=NNRcj8-EeYo"]Ls400 hydraulics - YouTube[/ame]
Bare in mine the car is lifted slightly enough for me to drive it around!
Leave a comment:
-
So here's the link for the video of the rear hydraulics working!
Leave a comment:
-
So I got a fair bit done this weekend! Got the pumps in and half of the wiring done! The rear rams are working unbelievably well close to a 2.5 foot lift with a savage drop! Started preparing the front bumper for paint as well as redoing the fenders to try and get them perfect!

Leave a comment:
-
Hopefully man they should arrive soon!Originally posted by 1stclasslex View Postnice
the rays are going to look good.
daaam thats a fast lift never seen that except on trucks
The lift in the video is on dead batteries and with the accumulators still not locked off! It should be a lot quicker!
Leave a comment:
-
nice
the rays are going to look good.
daaam thats a fast lift never seen that except on trucks
Leave a comment:
-
Right the last link didn't work but this one should! the front hydraulics are done as far as running the hydraulic lines and mounting the rams is concerned! Tomorrow or Saturday I shall be plumbing the rear rams and pump up and then properly wiring in the switch box! I need to get some good batteries so that is the reason for the lift being so slow the drop is quite savage though!
[ame="http://www.youtube.com/watch?v=-_zna8u3dxI"]Ls400 hydraulics - YouTube[/ame]
Also got the wheels fitting slightly better up front!
Leave a comment:
-
Im hoping this link will work! but anyway the front hydros are working although I need new batteries! https://www.facebook.com/photo.php?
v=213231885543700&set=vb.100005706692833&type=2&theater
Leave a comment:
-
Cheers guys! Got some more done on it today! due to the offset on the new wheels I decided to do a bit of fender work! The front wheel is 11j with a 30mm spacer and the rear an 11.5 with 40mm spacer!

Leave a comment:






Leave a comment: