Bought the car from a close friend of mine and i am beyond happy with the purchase
2006
Jetta 5 Sportline
DSG
2L Turbo
170 000
FSH
Needs: 2 rear tyres and rear brakes to be replaced soonish
![](http://i.imgur.com/yadly95.jpg)
inside shots:
![](http://i.imgur.com/9vptYzZl.jpg)
![](http://i.imgur.com/x7I49Iql.jpg)
installed some sound
![](http://i.imgur.com/LfPxyKb.jpg)
![](http://i.imgur.com/tcJL8kV.jpg)
FItted a 12inch pioneer sub and Starsound AMP
had the wheels and H&R springs fitted...
3 issues arose while fitting the rims:
1) i found i need shocks right around
2) i needed extended wheel bolts as the 14mmx25mm didn't even take, so out i went and bought wheel bolts, at R20 a bolt
3) the rear H&R springs are too low at the rear imho, if i should fit a few people i am going to scrape and this car is not meant for scraping, thats what the vr6 is for
ops:
In total the rear springs was removed 3 times, swapping them around, and the rims came off and on 3 times... tyres are noisy but will get new ones in due time.
Springs fitted H&R front and rear:
![](http://i.imgur.com/jvyXL9N.jpg)
Rims fitted + front H&R and OEM rear Sportline springs
![](http://i.imgur.com/gg5zlti.jpg)
![](http://i.imgur.com/ps9LSrp.jpg)
![](http://i.imgur.com/vxFlxl8.jpg)
![](http://i.imgur.com/QPIP0n9.jpg)
FUll H&R all round with new shocks and Audi TT Turbines
ET52 | 9J | 5x112 - 3mm spacer needed
![](http://i.imgur.com/FaTXdVs.jpg)
![](http://i.imgur.com/DZNwh2V.jpg)
saving for coilovers at the moment
2006
Jetta 5 Sportline
DSG
2L Turbo
170 000
FSH
Needs: 2 rear tyres and rear brakes to be replaced soonish
![](http://i.imgur.com/yadly95.jpg)
inside shots:
![](http://i.imgur.com/9vptYzZl.jpg)
![](http://i.imgur.com/x7I49Iql.jpg)
installed some sound
![](http://i.imgur.com/LfPxyKb.jpg)
![](http://i.imgur.com/tcJL8kV.jpg)
FItted a 12inch pioneer sub and Starsound AMP
had the wheels and H&R springs fitted...
3 issues arose while fitting the rims:
1) i found i need shocks right around
2) i needed extended wheel bolts as the 14mmx25mm didn't even take, so out i went and bought wheel bolts, at R20 a bolt
3) the rear H&R springs are too low at the rear imho, if i should fit a few people i am going to scrape and this car is not meant for scraping, thats what the vr6 is for
![Embarrassment](https://stanceworks.com/forums/core/images/smilies/redface.png)
In total the rear springs was removed 3 times, swapping them around, and the rims came off and on 3 times... tyres are noisy but will get new ones in due time.
Springs fitted H&R front and rear:
![](http://i.imgur.com/jvyXL9N.jpg)
Rims fitted + front H&R and OEM rear Sportline springs
![](http://i.imgur.com/gg5zlti.jpg)
![](http://i.imgur.com/ps9LSrp.jpg)
![](http://i.imgur.com/vxFlxl8.jpg)
![](http://i.imgur.com/QPIP0n9.jpg)
FUll H&R all round with new shocks and Audi TT Turbines
ET52 | 9J | 5x112 - 3mm spacer needed
![](http://i.imgur.com/FaTXdVs.jpg)
![](http://i.imgur.com/DZNwh2V.jpg)
saving for coilovers at the moment