This is sick! Those wheels will look cash. Just make sure you get the right springlesprangle, its important for flu jdmness
Announcement
Collapse
No announcement yet.
An uncommon platform, but not in like a cool way - Mazda6
Collapse
X
-
Originally posted by TheTynosaur View PostWhat made you decide to sell them already?
Originally posted by Belvader View Postbeen following this on instagram for a while, nice to see you hear dude
Originally posted by rice4life View PostI would love to see a complete Atenza overhaul.
Did they sell the atenza liftback in the states?
........
Any advice as to what rear tire size to run? I need something pretty meaty considering 18s are generally considered pretty small for this platform. Was thinking something like 225/50 on an 18x10. Or maybe 235/45.
Comment
-
Ran into a problem, looking for advice.
Bought tires for the rear, and was told by the PO that either the valve stems or the used tires that were on the front caused a leak -- near 10PSI per day. No problem, I thought.... took the wheels in to have the leak diagnosed and fixed. Turns out both wheels leak air because one is apparently cracked and one has been welded before, but badly. Of course, the guy I got them from swore up and down that this wasn't the problem when I asked him specifically upon buying them.
Is there a way to salvage these wheels? I think Manaray is now defunct so it will be impossible to secure barrels, right? Unless they share the same hole pattern as other wheels...
Comment
-
Just need to source 40 bolt 18" stepped barrels. They are all pretty much standard.
Comment
-
Originally posted by cobrawannabe View PostThis car is fucking awesome. I LOVE it.
-----------------------
Here's a side shot. You can see the ridiculous rake. This summer, I may end up doing a manual bag setup for the rears only.
Comment
-
Went to Cars and Coffee Charlotte this morning, which was a 2 hour drive but still worth it. Actually the first time I'd been to a meet other than Sowo, to which I didn't even bring my car.
Snapped this while checking to make sure I didn't hurt anything after leaving a gas station parking lot too quickly. Not bad for an iPhone 5s camera, but i'm no photographer.
Comment
-
Originally posted by rice4life View PostNeeds the front wheels to be done now
You will get used to scraping on things and driving slowly out of places. It just takes time, but it gets fun after a while.
Re: driving low, it was kind of an 'oh shit' situation and I sort of had to scrape. Misjudged traffic making a right. It may not look that low but the exhaust is maybe 3" off the ground. Drove through a crowded park full of speed bumps today in Charlotte and it was so funny seeing people trying to find the source of the noise
Comment
-
Comment