Announcement
Collapse
No announcement yet.
W201 v.2.0
Collapse
X
-
Cool project!
What heat shield are u using on the fire wall? DEI?
-Timo
Leave a comment:
-
Past month in 1 post
Timelines went bit south cause i found out that my ECU Manufacturer sold me half done ECU, so i sold it.. Going to buy new one, ive been planning to buy Maxxecu from sweden. they seem to be superb on the customer service and updating the software and such.
Picked up custom Bilstain Shocks... (50mm shorter than oem and can handle around 10 to 12kg or 100-120n/mm springs)
Headliner fully in place as the lamp and such as well.(bit soggy on passanger side)
Photo of the interrior wiring process:
Fuse & relay boxes under rear seat:
All the wiring should stay under the carbon piece.
And lastly start of working the brakes so mastercylinder modified and in place with booster.
Engine bay picture..
Then test fitting W211 E500 brakes on wheels.
Fits pretty OK, im happy with that. then im going to use W211 E220-320 Brake discs up front (295x28mm) offset of these are 4mm different than W124 E320(24V)... should fit these calipers just fine. (according to my measurements)
Hella pile of parts
So new lamps front + rear Mercedes Originals
Leave a comment:
-
Pro Tip: Fake alcantara at that fabricshop directly opposite side from Bauhaus Tammisto, might be "eurokangas" or something. 19e or so, black sofa-rated fake alcantara.
Leave a comment:
-
Ok, This is my last post for this year, probably next update will be on January will see what happens.
Im taking break off all sosical media. Altho im not in Facebook anyway. but meaning Forums, Online chats via phone etc.
Leave a comment:
-
Originally posted by loekaaz View PostMaybe you could blacken your roof / headliner with some black shoe polish.
Just look at this:
http://www.stanceworks.com/forums/sh....php?p=1364414
So i dont think the shoe polish would work. for the most part im trying to go for the oem look, W201 never had black headliner from factory that is. the one i have is from black interrior and its same color as mine were with the black interrior and the one i have on the other benz :p
But maybe in some distant future all interrior is alcantara as i like it alot but its 175€/m and the headliner itself would take 1.5m so ~260€ for alcantara only after that some custom work to be done.
Leave a comment:
-
So finally i got my connectors that i ordered, wasnt that easy to find these either..
12pin
4pin
and BIG 4pin
Leave a comment:
-
drroooollll, like it a lot, especially the creative way of fitting in a stack, good job
Leave a comment:
-
Originally posted by Teeson1111 View Postfull interior eh? is this gonna be a street car?
looks good! you work quick
Other that the full interrior looks money cars like this.(my opinion)
Yes car is going to be used on street and various tracks(1/4 mile, 1mile, round tracks)
In the end this going to be 2.0 version of the first benz i madeand ive clocked around 40k on that one.
Last edited by Exami; 09-05-2014, 04:56 PM.
Leave a comment:
-
full interior eh? is this gonna be a street car?
looks good! you work quick
Leave a comment:
-
Ok today i remembered to take camera with me to garageand ive been busy this week as im on vacation.
Trunk pieces installed. not all yet..
More of interrior fitted, also central locking wirings are done for good.
Ecu mounted into glovebox.. it was real hard to find suitable place.. but this seems ok, i can still fit my sunglasses and car papers there.. all i need in there
More photos of test fitting dash..
Better pics of the headliner..
Then back what happened today... some glass plasting parts and painting brake calipers..
these are going to be painted as well.. but in neat future..
Last edited by Exami; 09-10-2014, 08:51 PM.
Leave a comment:
-
Originally posted by Exami View PostIt shows, Water temp, oil temp, oil pressure, fuel pressure, boost pressure, laptime, 0-100 time, 400m time, speed, trip, odometer. what more could you want?oh yea the weed, it wont show nearest dealer
Leave a comment:
Leave a comment: