mk3 gti and an e21

[stancefag]

Your Mk3 is beautiful! I'm sure the E21 will turn out great as well

[mk3f.t.w.]

put in my stsuspension rear sway bar. will do the front soon. I cant really feel a difference because my rear subframe bushings arent made yet, therefore my rear subrame is all loose and sloppy. Looking forward for those bushings to come in

[mk3f.t.w.]

So I put my SS braided lines on. The fluid looked like it was from 81. I took off the rear lines and it was none dry. Just dirt and air in there. My brakes feel amazing now with fresh dot 4, lines and no air. It great that u was able to use my brake bleeder as well

[mk3f.t.w.]

picked up a spoiler and got a couple bushings in for the e21

[mk3f.t.w.]

[mk3f.t.w.]

[mk3f.t.w.]

Maybe with my upcoming paycheck I will get a grill

[ryannnwith2ns]

Consider me jealous of that e21. That would be a fun car to fix up. Put some kidney grilles on the poor thing! (:

[mk3f.t.w.]

nothing new. Just finished re-doing my fittis and go them back on. Put together a local bbq.



Picked up some new bushings, SS lines, porterfield pads, and new balljoint for the e21.

fixed some dash bulbs

[mk3f.t.w.]

I want to make my front wheels fit a bit better. They poke a bit too much. I would like them flush or tucking. Unfortunately I have the thinnest adapters I could get at the time from adaptec speedware (15mm). Then I machined the front wheel pads a few mm to bring them in. And I have h&r camber bolts maxed out.

I am looking for peoples opinions based or previous experience please. Whtever is cheapest is what i will do haha. I want to run the wheels again, and have them fit well, but really broke right now.

Some of the solutions i came up with:

1) Run golf/mk2 suspension to narrow the front track of the vr plus suspension (I already have mk2 control arms, tie rods, and one axle)

2) Get camber plates up top

3) Find thinner adapters

4) Fill n drill wheel and run small spacers

5) find new front lips (most likely custom due to 15" center on 16" wheel)



note the front pork

[mk3f.t.w.]

Nothing new here. Just a photo dump of my e21 and mk3

[mk3f.t.w.]

and the fenders pulled a whole bunch to get them to fit??

Nothing too crazy. Just a fender roller here and there

[Vwdubluvin]

and the fenders pulled a whole bunch to get them to fit??

[mk3f.t.w.]

*whole lot

[mk3f.t.w.]

what where the specs on the Schmidts???

Mainly rwd cars.

What! Yeah right. A whole of my vw friends I know from bmx!

Schmidt 16x9 et15