1990 UK Vauxhall Nova SR20DET Space Framed Trackcar

[The Simps]

Rear End Work - Pt 5

Happy the structure was good I made all the remaining skirt/frame pieces and then the panels. Most of the panels are just cardboard templates as the plan here is to bond in carbon fibre sheet, hence why I wanted every panel to be simple and flat! Framework I plan to do a in a light grey/anthracite and I think will look cool against the carbon

After-00003.jpg
After-00026.jpg
After-00004.jpg
After-00027.jpg


That was where I've got up to on the rear for now. Time to move on to the revised floor. More on that another day.

Thanks for looking.

[The Simps]

Rear End Work - Pt 4

Next was adding a couple of tubes. Time to play spot the difference...

Modding Tubes-00006.jpg
Modding Tubes-00007.jpg
Modding Tubes-00008.jpg
Modding Tubes-00009.jpg

[The Simps]

Rear End Work - Pt 3

First I wanted to remove and reinstall a tube as I ***** the way it fitted as it was off by about 5mm and resulted in the framing not looking right. So out it came and got replaced...

Modding Tubes-00001.jpg
Modding Tubes-00002.jpg
Modding Tubes-00003.jpg
Modding Tubes-00004.jpg


The eagle eyed of you may have also noticed I modified where the lower bar used to mount each side that was cut out so that it would accommodate the panelling better...

After-00017.jpg

[The Simps]

Rear End Work - Pt 2

Liking the way it was looking I continued with the next two...

After-00020.jpg
After-00021.jpg


Side by side comparison to the old panels...

Side by Side-00001.jpg


Happy now that this was the way forward, I first had to fix and add some tubing.

[The Simps]

So basically, I built the main chassis and did most of the work over 5 years ago. A lot has changed since then and I've watched a lot of other project videos and gained inspiration. So starting from the back I've been working through what I didn't like and redoing it. There's some stuff I'm still not 100% with and would do differently if starting again, but scrapping this and starting again now would just be silly (although there were lots of nights contemplating that one!)

So first update...

Rear End Work - Pt 1

So the original rear end was panelled out like so...

Before-00001.jpg
Before-00006.jpg
Before-00007.jpg


I never really liked how the panels fitted. There was no consistency to it, they were rough, and I ***** how the lower tube that goes side to side fitted. So that tube got chopped out, panels cut out and then I trialled an idea inspired by the Bibster build doing some sunken panelling using some 3mm x 10mm bar to create a skirt/frame...

After-00008.jpg
After-00014.jpg

[The Simps]

We're not as many as it used to be years ago but some of us are always watching

Ok so I'm gonna do these updates in stages as there's just so many pics to sort through.

[Fruttolo]

We're not as many as it used to be years ago but some of us are always watching

Bring it on!

[The Simps]

I have to say tour timing is spot on. Just the other day I was wondering "what happened to that tube chassis the guy keeps calling a vauxhall
Share some more details, I see a gearbox and some wheels now, but no details.

Thank you for taking the time to reply. I have loads of pics of the work since last autumn so will pull it all together for an update. Didn’t want to do it if no-one was watching! Lol

[gnmzl]

I have to say tour timing is spot on. Just the other day I was wondering "what happened to that tube chassis the guy keeps calling a vauxhall
Share some more details, I see a gearbox and some wheels now, but no details.

[The Simps]

Not sure many people are on here anymore let alone reading this thread! lol But thought I would update that progress is still happening. Since the start of the year I've been working through the car front to back redesigning parts I didn't like and improving where I can. I've seen a lot of YouTube projects in the 5 years since a lot of the work on this project was done which has inspired new designs.


IMG_5667.jpg
IMG_5793.jpg

[The Simps]

And it’s on!

Time to crack on


b016d527734269675133cf83a2c532d6.jpg93e1f46ecca1c7290a911d2e37fad6ed.jpg

[The Simps]

Mounted the front section of the spit today..

efd00d54e78e0b0a21e78154944eace0.jpg2dbcdfc7a12a17bc8350849d55960123.jpg7e2968508906d980109c15d2a5856a54.jpg6927c257004de602e1ffb7b81ed8467e.jpgbe15b31d7992919e0b193ecf2a98ae8d.jpg

[The Simps]

Thank you hambler

[hambler]

New to the forum, and I love the weird builds. Impressive work, especially considering that it looks like you did the majority of it in a rather small shop. Can't wait to see it finished!

[The Simps]

Thanks fellas!