Originally posted by bdsevern
View Post
There are many parts got progress.
First! my BBS LM custom 14j, It was cut the outer rim and combine the inner rim of 8.5j and 9.5j together.
[IMG][/IMG]
[IMG][/IMG]
From the photo you could see the lip have no step cause the inner need more strong so I have to lathe it for beauty.
this is before lathe
[IMG][/IMG]
and this is after lathe
[IMG][/IMG]
[IMG][/IMG]
Then when we get rim, next we will build window.
The stock BBS LM is 2 pcs. construction so it will has a step only one side. So I lathe a step in the front it about 3 mm. and still left the center 5 mm. estimate. I think it strong enough.
[IMG][/IMG]
The second part progress, the ITB.
I had bought the GSX 1000 throttle about 2 bank, 8 throttle but it lost from shipping.
So next I bought the S85 throttle body BMW V10, and this time it came!
[IMG][/IMG]
After I get the throttle I build the manifold plate for set these throttle
It's manual milling by me.
[IMG][/IMG]
[IMG] src="https://c4.staticflickr.com/8/7780/17351150688_3dde0a0a83_z.jpg" width="640" height="428" alt="DSC_6506-2">[/IMG]
[IMG][/IMG]
And the TPS, throttle position sensor, it need to change to toyota also
I make the adapter and it work good quite well.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
the photo top, the right one is the stock of toyota and the left one is mine.
[IMG][/IMG]
About the video testing, I just upload a second so it need time to processing.
will update later
enjoy guys
Comment