Tweet
Hey guys, my name is Lorenzo, been on S|W for a while now, but haven't really posted much, here's my daily driver. I recently picked up an 87 FC3S Turbo II as a 'daily drifter' and I'll start a thread on that soon! Copy and pasted this from another forum so the first couple stuff is pretty old. oh whale, enjoy.
I bought a used 2007 WRX TR in OBP bone stock from a dealership in Pahrump on April 10, 2012. This has been the progress since haha
This was the day I brought her home:
Got to work and brought it down a bit with Eibach springs, still monster truckin'
Did the cheap, RA-R grille mod and scored a great deal on some 17x8 Rota G-Forces from somebody on flatfourlv.com, a Subaru club in Vegas. My buddy Nico shot a couple rolling shots of the car!
Got an STi Wing
Had a little bit of AWD fun, with the encouragement of my dad (he was rally car driver in the early 80's) since it was still a monster truck!
Top was me in my car, and bottom is my dad practicing in '82 with a fully caged, built Lancer.
Found another awesome deal on a set of wheels, 18's this time. Drag dr31 18x8 for 220! Lowered it a bit more with Tein S-Techs, and got an S204 rep lip from ebay
Went on a little shoot at an elementary school.
After that I picked up some Godspeed coilovers for more low, sold the drags, and slapped the old rotas back on for the time being. at the time I was in a group buy for some RPF1's but pulled out bought a project E30 for my dad and myself.
Also did the diy black headlight housings
Rig Shot by Ivan Clean by Lorenzo Bayuga, on Flickr
Front 1- Fireworks V2 by Lorenzo Bayuga, on Flickr
Front 2 Final by Lorenzo Bayuga, on Flickr
Got a set of Bride Gias V2 seats and wrapped my dash in carbon fiber vinyl
Bride seats by Lorenzo Bayuga, on Flickr
Bride seats by Lorenzo Bayuga, on Flickr
Got tired of shitty fitment and picked up some XXR's as temporary wheels with better fitment (i know i know, but my plan is XD9's in the future)
Lorenzo3 by Ivan Dobrev, on Flickr
Lorenzo by Ivan Dobrev, on Flickr
L4 by Ivan Dobrev, on Flickr
Roller 1 Final2 by Lorenzo Bayuga, on Flickr
Pretty much how it currently sits, just a little lower now with STi rocker panels
My car photo by Nico Bergonia by Lorenzo Bayuga, on Flickr
Current mods:
- Bride Gias V2 Seats
- Cobb Delrin shift knob
- Hotchkis strut tower brace
- Godspeed 16-way coilovers
- XXR 527 on 225/40 Dunlop Direzzas
- N1 3" Catback
- Injen Cold Air Intake
- HKS Catless Downpipe
- TurboXS BOV
- ACT Stage 2 Clutch
- ACT Lightened Flywheel
- Megan Racing short throw shifter
- S204 Rep Lip
- STi Wing
- STi rocker panels
Thanks for checking it out guys! Shooting more photos soon of current ride height and skirts. Saving for either GramLights 57DR or Work XD9's opinions are welcome!
I bought a used 2007 WRX TR in OBP bone stock from a dealership in Pahrump on April 10, 2012. This has been the progress since haha
This was the day I brought her home:
Got to work and brought it down a bit with Eibach springs, still monster truckin'
Did the cheap, RA-R grille mod and scored a great deal on some 17x8 Rota G-Forces from somebody on flatfourlv.com, a Subaru club in Vegas. My buddy Nico shot a couple rolling shots of the car!
Got an STi Wing
Had a little bit of AWD fun, with the encouragement of my dad (he was rally car driver in the early 80's) since it was still a monster truck!
Top was me in my car, and bottom is my dad practicing in '82 with a fully caged, built Lancer.
Found another awesome deal on a set of wheels, 18's this time. Drag dr31 18x8 for 220! Lowered it a bit more with Tein S-Techs, and got an S204 rep lip from ebay
Went on a little shoot at an elementary school.After that I picked up some Godspeed coilovers for more low, sold the drags, and slapped the old rotas back on for the time being. at the time I was in a group buy for some RPF1's but pulled out bought a project E30 for my dad and myself.
Also did the diy black headlight housings
Rig Shot by Ivan Clean by Lorenzo Bayuga, on Flickr
Front 1- Fireworks V2 by Lorenzo Bayuga, on Flickr
Front 2 Final by Lorenzo Bayuga, on Flickr
Got a set of Bride Gias V2 seats and wrapped my dash in carbon fiber vinyl
Bride seats by Lorenzo Bayuga, on Flickr
Bride seats by Lorenzo Bayuga, on Flickr
Got tired of shitty fitment and picked up some XXR's as temporary wheels with better fitment (i know i know, but my plan is XD9's in the future)
Lorenzo3 by Ivan Dobrev, on Flickr
Lorenzo by Ivan Dobrev, on Flickr
L4 by Ivan Dobrev, on Flickr
Roller 1 Final2 by Lorenzo Bayuga, on Flickr
Pretty much how it currently sits, just a little lower now with STi rocker panels
My car photo by Nico Bergonia by Lorenzo Bayuga, on Flickr
Current mods:
- Bride Gias V2 Seats
- Cobb Delrin shift knob
- Hotchkis strut tower brace
- Godspeed 16-way coilovers
- XXR 527 on 225/40 Dunlop Direzzas
- N1 3" Catback
- Injen Cold Air Intake
- HKS Catless Downpipe
- TurboXS BOV
- ACT Stage 2 Clutch
- ACT Lightened Flywheel
- Megan Racing short throw shifter
- S204 Rep Lip
- STi Wing
- STi rocker panels
Thanks for checking it out guys! Shooting more photos soon of current ride height and skirts. Saving for either GramLights 57DR or Work XD9's opinions are welcome!
Comment