Slammed Eg. Static. Bbs Rs ect

[Joshmsartin]

civic is gorgeous! this is exactly how id build an eg hatch.

Thanks a lot man! I appreciate it.

Nice car! But its nicer with oem bumper

Grtzz

That is the oem bumper sir

[Joshmsartin]

Thanks man! And I ment Youtube! lol, So what your saying is shorten the parts the connect to the chassis and the brake system? Or trim the piece that holds them together? lol

Shorten the connections. Not the holding nut

[Belgian_Astra]

Nice car! But its nicer with oem bumper

Grtzz

[05subysti]

civic is gorgeous! this is exactly how id build an eg hatch.

[TonyToxic JDM]

Sup man! what is YT?

Im running -10.2 on the hatch in the rear.

Basically the camber kit is two threaded eye bolts and a giant nut that is threaded all the way through.

From the factory (skunk2, blox, spc, ect.) The rear camber kit maxed out only goes like -7 degrees. The only reason it won't camber any more then that is because the threaded eye bolts are threaded so far in that they are hitting each other inside the nut.

Basically all you have to do is cut both ends shorter so they can thread in farther without hitting eachother. I used a dremel with a tiny blade. Hope that made sense if I can find a pic ill post it up.

Thanks man! And I ment Youtube! lol, So what your saying is shorten the parts the connect to the chassis and the brake system? Or trim the piece that holds them together? lol

[Joshmsartin]

i think its gorgeous man, love the sportcarmotion front bumper + the bbs rs setup, looks super expensive

Thanks brotha! I still have the other bumper. I love oem stuff. And the fitment on this bumper is so much better. and actually sits lower. But I still like the sportscarmotion as well. As for the wheels. I love them. As soon as this is no longer my daily I think im going to move the 9" up front and go 10" rear.

[Neoki]

i think its gorgeous man, love the sportcarmotion front bumper + the bbs rs setup, looks super expensive

[Joshmsartin]

Yo bro, its funny I saw this on YT before here! Nice build! Quick question, how did you get -10 camber on the Si? I need atleast that or more to fit my new set up in the rear, but not sure how. And how much camber do you have now on the hatch?

Sup man! what is YT?

Im running -10.2 on the hatch in the rear.

Basically the camber kit is two threaded eye bolts and a giant nut that is threaded all the way through.

From the factory (skunk2, blox, spc, ect.) The rear camber kit maxed out only goes like -7 degrees. The only reason it won't camber any more then that is because the threaded eye bolts are threaded so far in that they are hitting each other inside the nut.

Basically all you have to do is cut both ends shorter so they can thread in farther without hitting eachother. I used a dremel with a tiny blade. Hope that made sense if I can find a pic ill post it up.

[Joshmsartin]

Love the setup, wheel combo is sick. The other front was just a little off to me, because it looks like it pointing upwards, but that new front I'm digging. Planning on painting it with the side skirts?

Thanks a lot man. I love the wheels. A lot of work put into them but it was well worth it.
On the sideskirts. No im keeping them black. Flows well with the lip and doesn't scratch off.

[TonyToxic JDM]

Yo bro, its funny I saw this on YT before here! Nice build! Quick question, how did you get -10 camber on the Si? I need atleast that or more to fit my new set up in the rear, but not sure how. And how much camber do you have now on the hatch?

[gman1227]

Love the setup, wheel combo is sick. The other front was just a little off to me, because it looks like it pointing upwards, but that new front I'm digging. Planning on painting it with the side skirts?

[Joshmsartin]

Oem bumper and sir lip. Also lowered the front a tiny bit.

Took a few pix yesterday tell me what you think





This is probably my fav.



The daily struggle







Don't drink and drive.

[Joshmsartin]

im not entirely sure what is happening here but i like it

Haha Okay. SO. Here is what happened. The night before the meet i got super wasted and tried to even out the rear of my car. When i showed up at the meet I looked at the car and it was tucking rim on the drivers side and 2" of rim tuck on the passenger. So i took some phone books from a gas station and backed onto them and jacked the car up. And fixed it in the line.

I'm hoping hydro

Static

[Joshmsartin]

I'm no Honda fan, but I'm really liking the way this car looks. I don't really like how tilted up the rear window spoiler is, imo one that was flush with the roofline would look better.

The wing looks good in my eyes. But I understand where your coming from. Its a love **** relationship with the wing

[Joshmsartin]

I like how clean it is.

I do not like the hood risers even though I recognize the necessity... it just looks very very misaligned.

The Hood risers are removed now. Still doing some trimming but it fits decent. The car is going to be redone completely sometime in the near future. Probably the only thing i will keep is the rims. I already sold the seats. New stuff on the way.