*Help Needed* 87 Nissan hardbody

[87_maverick]

I have this project that i have been working on for a while, and i can't Find a way to drop the rear, I have a 4in block with mono leaf spring, And its still too high.

[87_maverick]

[87_maverick]

[Nick475]

Looks nice! Ollie could probably answer your questions

[GOATGUY91]

Can you post an up close picture of your setup?

[Gordo78]

You can redrill your front hangers at the front of your leaf springs up a few inches and back a half an inch (If I recall), and get a little over another inch total drop that way. You'll have to get some new bolts for the front though.. I've gotten about 4.5" out of that, and a block, no modding of my leafs yet.

Here's a how to, lots of good info on this website specific to the D21. If you aren't a member here, you should be.

http://www.infamousnissan.com/forum/showthread.php?t=2673

[TheCrabMaster]

Like he said redrill, and they also have drop leaves you can buy.

[Randomofodication]

Your truck looks awesome man

[Isuzupickup]

Odds are you're sitting on the frame/bumpstop. See if your axle is in contact with anything. My truck has 4"blocks and 3" drop leafs with a frame notch. That's the best way to go unless you get a 4 link set and use coilovers. Oh, you could have the leaf springs dearched too.