If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Im glad someone else has bit the bullet and put one of these on air! Ive got a 1990 300ce on air, If you get the bag mounts just right you should have the hole underneath of the car resting on the floor! Here's mine
Im glad someone else has bit the bullet and put one of these on air! Ive got a 1990 300ce on air, If you get the bag mounts just right you should have the hole underneath of the car resting on the floor! Here's mine
Yea man, I hope to be able to lay flat.
Cool thing about the Compustar unit is that has aux outputs so I can have remote bag control,
sounds good man,just a few things you might have to play around with, the front roll bar on mine hit the floor before the rest of the body did and the rear anti rollbars fowl the body when on a full drop so a little notch is required also the sump lays on the floor to so id recommend some engine spacers or just be very careful were you park!
sounds good man,just a few things you might have to play around with, the front roll bar on mine hit the floor before the rest of the body did and the rear anti rollbars fowl the body when on a full drop so a little notch is required also the sump lays on the floor to so id recommend some engine spacers or just be very careful were you park!
Awesome opossum, I think I may get rid of my sway bars once it's all done.
I've been on the hunt for some 18" Work Equips for my ride, something not to much. I want to work on them myself (i.e polishing and what not). Have you decided on what kind of wheels?
Comment