bmw e36 m3 94 wide body

[1jze30]

lm usually not a fan of 36's being honest, but your kit takes away the squareness of the original bodywork.
I quite like it looks good!
but I agree with everyone about the rims
these would look boss with some spacers

http://www.rotiform.com/products_blq_monoblock.htm

[shanksy21]

Hahahaha at the time it was the cheapest option, I will be changing back, just need money, really was just to get headlights and indicators onto the front for roadworthy aye, but yes I will b changing them hahahahaha

[rapide]

Wheels take money and when ya have a house mortgage things take time, ya I'll b getting 11.5 wide +2 which will give me roughly 133mm of stepped dish ^.^ for the negative comments, well I no its not everyone's cup of tea but ya need to appreciate the work that's gone into it, I've done everything myself, money ain't easy to come by and when the rims I want are gonna cost me 7k roughly to import here it takes a while.

I did appreciate your work.

Up until the point you installed those headlights, I just can't help myself to comment. Please, pretty please, can you install the original headlights back?

[shanksy21]

Cheers mate, ya I'm totally aware it's not to everyone's likings, there is a few things I'd do diff now that I've done it, but yes rims are next once I get the girl running again aye

[Robitussin]

If i had an e36, it's not what i would do but personally i kinda like it. Just needs some wheels like stated above. Hope you keep us updated!

[shanksy21]

I'm getting SSR professors, only way to get them is to import from Japan, fronts are gonna be 19x9.5 +12 wrapped in 265s and the rears will be 19 X11.5 +2 wrapped in 315s, rims will b about 4k landed then about 2-3k for tread as 315s ain't cheap, joys of being in Australia and not much option for custom sized rims with the pcd and offset I need

[Stolzy]

What kind of wheels do u want that cost $7k??

[shanksy21]

dude wtf you had one job

Hahahaha I'm still going with that one job, things take time aye :/ honestly hard to save on one wage while paying for a house, it's a project now really, but coz the motor speared in the rims are now on the back burner

[shanksy21]

What kit is it?

The kit is from fibrewerkz, I liked the look of this one compared to the other wide body kits they sell for the e36

[shanksy21]

Wheels take money and when ya have a house mortgage things take time, ya I'll b getting 11.5 wide +2 which will give me roughly 133mm of stepped dish ^.^ for the negative comments, well I no its not everyone's cup of tea but ya need to appreciate the work that's gone into it, I've done everything myself, money ain't easy to come by and when the rims I want are gonna cost me 7k roughly to import here it takes a while.

[244Brick]

This is really almost RAD.... you just need suitable wheels! OOOOOh man its right on the edge of dopeness

[M0HNKE]

What kit is it?

[LXotic]

Should have done it on a non-M E36.... what a trainwreck.

[aprophet13]

might need a little wider than 18x10 +15.. but that purple is nice. Once you fill those arches out this will be pretty bad ass

[rapide]