Korean Air

[Chuckdee]

to give you an idea of how it looks, this is my work:



after I wrapped before using heat:


...just hover the piece over the stove if you don't have a heat gun, about 8-10 inches. Just do it real quick and you can see the vinyl "melting" or i guess shrinking on the surface. It's made to use with heat, so don't worry, it won't burn off lol. Use whatever you can to form the vinyl on the surface for a clean look.



final result

End product (along with my royal wheel )



like the color, here's where I got it:

http://www.ebay.com/itm/3M-Di-Noc-Bubinga-Gloss-Wood-Grain-Vinyl-Adhesive-Backed-48in-x12in-/380464703596?pt=Motors_Car_Truck_Parts_Accessories&hash=item589576a86c&vxp=mtr

and here's a list of all the other colors and sizes:

http://www.ebay.com/sch/i.html?_odkw=wood+rain+vinyl&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313&_nkw=wood+grain+vinyl&_sacat=0

[244Brick]

Hell yea, that's looks fricking amazing!! Exactly how i want it!!

[244Brick]

Update 2/2...frigging today

Today is the day, I just order my first BIG BOY airride kit!!! Autopilot V2, Air House 2 and Viair 444C compessor Thanx Rali sooooo much for all your help man and the crew over at BAGRIDERS.

Hey Ashton, Shix about to get REAL

[aLaFleur]

It's about damn time!!! I'll go ahead and get the tools all out.

[244Brick]

yes you can.. I think the install will still be on March 16-17

[MommysLittleMonster]

Holy isht.

Nice work on the woodgrain wrapping, can't wait to see it on air.

[Chuckdee]

Nice work on the woodgrain wrapping

Thanks

[07NJx355]

awwwwwwwwwwwwwwwwwwwwwww yeah, can't wait til you install it man!

[brsteinbach]

Big Boy status now! None of that old accord crap.

[scweet14]

Really looking forward to updates bags are gonna set this thing off!

[SD202]

Today is the day, I just order my first BIG BOY airride kit!!! Autopilot V2, Air House 2 and Viair 444C compessor Thanx Rali sooooo much for all your help man and the crew over at BAGRIDERS.

Hey Ashton, Shix about to get REAL

ahh yeah shit just got real. That v2 was by far the easiest thing I have ever installed ( electronically ) LOL especially if you're wiring only one compressor as the harness comes pre assembled with a single 12v 40a relay for single comp setup. I added a twin compressor setup on my brothers b5 took a lil extra wiring but non the less V2 was still super easy to install if your a bit technically inclined to begin with. Just a word of advice unless you upgraded your fittings dont be surprised if some are leaky from the start Dom had to replace 3 bulkheads. My bro had to replace two PTC fittings. We just went to parker and got the DOT-A all brass PTC fittings not a problem since. Same with doms wagon. we used parker fittings instead of the supplied ones from bag riders.

[milano_red]

Hell yea!

[Alex@BagRiders]

Cant wait to see this one!!!

[Alex@BagRiders]

ahh yeah shit just got real. That v2 was by far the easiest thing I have ever installed ( electronically ) LOL especially if you're wiring only one compressor as the harness comes pre assembled with a single 12v 40a relay for single comp setup. I added a twin compressor setup on my brothers b5 took a lil extra wiring but non the less V2 was still super easy to install if your a bit technically inclined to begin with. Just a word of advice unless you upgraded your fittings dont be surprised if some are leaky from the start Dom had to replace 3 bulkheads. My bro had to replace two PTC fittings. We just went to parker and got the DOT-A all brass PTC fittings not a problem since. Same with doms wagon. we used parker fittings instead of the supplied ones from bag riders.

If the lines make a slight turn out of the bulkheads, they usually leak so this doesn't surprise me but what ptc fittings did you get from us that were leaking? Were they the SMC fittings (black and grey plastic with brass threads)? We started to include those in our kits because they are DOT approved and we haven't heard of any complaints about them in the past. Very interested to hear which ones they were.

[aLaFleur]

ahh yeah shit just got real. That v2 was by far the easiest thing I have ever installed ( electronically ) LOL especially if you're wiring only one compressor as the harness comes pre assembled with a single 12v 40a relay for single comp setup. I added a twin compressor setup on my brothers b5 took a lil extra wiring but non the less V2 was still super easy to install if your a bit technically inclined to begin with. Just a word of advice unless you upgraded your fittings dont be surprised if some are leaky from the start Dom had to replace 3 bulkheads. My bro had to replace two PTC fittings. We just went to parker and got the DOT-A all brass PTC fittings not a problem since. Same with doms wagon. we used parker fittings instead of the supplied ones from bag riders.

It's literally so easy that's it's fun to do haha I installed it for the first time a few weeks ago and was extremely impressed with it. I can't wait to do this one.

If the lines make a slight turn out of the bulkheads, they usually leak so this doesn't surprise me but what ptc fittings did you get from us that were leaking? Were they the SMC fittings (black and grey plastic with brass threads)? We started to include those in our kits because they are DOT approved and we haven't heard of any complaints about them in the past. Very interested to hear which ones they were.

I had a few of the SMC fittings leak slightly on the last setup I did, but after some wiggling and poking they stopped.