w114 moocedes w115

[Crippz]

Does anyone have the sizes needed for the plates etc? Thanks

[JordanByrneJ07]

So so amazing,
Doing air on my 114 next week, I can only dream to get it this low. like the way the rear setup has been done!

[RetroworksGarage]

yeah, as a4crn mentioned, there are pics of the rear setup a page back or so.

soo.. not much really been going on atm, have lost a considerable amount of daylight at this time of year and with the rain and temp its time to do a few things in the garden that i have been putting off.

but.. ive bought another 2nd hand windscreen

will part the poor old thing out after that... has lost most of the sills to rust.

dash is back out.. and the nightmare has started


and playing with some ideas for the wheels

love the caps... any idea you have to put the cap on that steelie rims?

[niscort]

Been over a year on the road now.. onto my second engine and have changed a few rear drive shafts... I havent had the need to wash it yet... wheels do need a little attention though

[FRANKIBOY27]

Amazing

[aprophet13]

10/10 this is perfect- nice attention to detail

[541NTT]

If I have to be honest, and I will, I have to say you might want to reconsider the green. It doesn't seem to match the black trim somehow...

Think its a bit late for that mate.
Personally i dig it, fits the theme!

With your dog bowl hubcaps your running now how they attach to the rims? They have a clip system like the larger OEM hubcaps?

I second this, would love to know how you did it!

[kipperhughes]

With your dog bowl hubcaps your running now how they attach to the rims? They have a clip system like the larger OEM hubcaps?

[loekaaz]

If I have to be honest, and I will, I have to say you might want to reconsider the green. It doesn't seem to match the black trim somehow...

[niscort]

rims are 16x7" running 205/55's. no real idea what model as I bought them based on the rim specs.

rerouted some of the exhaust and took the belly off the cat convertor.. ive got it as low as i can for now.. any further will require something extreme. just need to get out and about and take some good pics.

[robsterthelobster]

Hi mate could you tell the red steel wheel size and tyre sizes you have fitted on your car please? And which model merc they are from

[danielsahhhn]

doin it right!

[niscort]

been playing again.. have taken another 10mm out of the bag brackets all round. To make the most of this there was a bit of cutting..



cant go any lower in the rear as im now dragging the diff housing




front has gone down as well with some clearancing required on the subframe to control arms. Exhaust will need some more work to fit

[niscort]

How's it go with the turbo 6 in it?

yeah good, so far.

unfortunately not wth out a few issues.
water pump has already died and been replaced.
Replaced the rear drive shafts last weekend to resolve a noise and vibration... which is still there.. managed to get the car running on a hoist and may have overlooked aligning the universal joints when installing the tailshaft. That will come out this weekend and hopefully stop the rumble for good.

other than that.. still playing with the widened stocks... set the offset for the rears. just need a chance to confirm this work for the fronts as well



parked after its first trip... iced up windscreen and fog.. fun fun

[SBW114]

How's it go with the turbo 6 in it?


Sent from my iPhone using Tapatalk