Hey heres my ride
1990 BMW 3-Series Sedan 325i
update 9/1/13
after a long bit of downtime the car has a running driving 1jzgte out of a 94-95 toyota chaser.
Suspension
KYB Gas adjust shocks with vogtland lowering springs
Exterior
unknown 15" wheels no one knows what they are :-/
ZENDER HeckSpoiler rear lip
Engine
dump exhaust
Fmic
1jzgte twin turbo
Future.......
megasquirt
15-16" wheels maybe a staggered setup
maybe a good single turbo setup or steel wheels for the CT12A turbos
coilovers
full exhaust




trying to find the problem i have shit disconnected



missing some trim here and there but i also had it torn apart cleaning stuff too




pulling a replacement m20 and a 5speed swap for my car from my friends doner

Big update ive been working slowly on the car and it now runs
Starting to clean it up I still can not find out the brand of the wheels all i know now is that they are 4 lug universal 15x6.5 +38 et that were originally silver

The motor and 5 speed Just another M20B25

Starting to strip out stuff getting the swap started

I ran in to a snag and cleaned the headlights since the yellow high beams just wasnt my thing.

My snag was the fact the car had 1 piece from the manifold all the way to the tip. So i fixed it with a portban.

The bad motor gone.....

This is just after the 1st drive.

These are the options that came on the car when new

Here is a video of the first startup It smoothed out after warming up.
[ame="http://www.youtube.com/watch?v=Hf97jOy_Cl0"]1990 e30 325i sedan - YouTube[/ame]
1990 BMW 3-Series Sedan 325i
update 9/1/13
after a long bit of downtime the car has a running driving 1jzgte out of a 94-95 toyota chaser.
Suspension
KYB Gas adjust shocks with vogtland lowering springs
Exterior
unknown 15" wheels no one knows what they are :-/
ZENDER HeckSpoiler rear lip
Engine
dump exhaust
Fmic
1jzgte twin turbo
Future.......
megasquirt
15-16" wheels maybe a staggered setup
maybe a good single turbo setup or steel wheels for the CT12A turbos
coilovers
full exhaust




trying to find the problem i have shit disconnected



missing some trim here and there but i also had it torn apart cleaning stuff too




pulling a replacement m20 and a 5speed swap for my car from my friends doner

Big update ive been working slowly on the car and it now runs
Starting to clean it up I still can not find out the brand of the wheels all i know now is that they are 4 lug universal 15x6.5 +38 et that were originally silver

The motor and 5 speed Just another M20B25

Starting to strip out stuff getting the swap started

I ran in to a snag and cleaned the headlights since the yellow high beams just wasnt my thing.

My snag was the fact the car had 1 piece from the manifold all the way to the tip. So i fixed it with a portban.

The bad motor gone.....

This is just after the 1st drive.

These are the options that came on the car when new

Here is a video of the first startup It smoothed out after warming up.
[ame="http://www.youtube.com/watch?v=Hf97jOy_Cl0"]1990 e30 325i sedan - YouTube[/ame]
Comment